Motor Home Mud Flap with Drop Down and Custom Text



This motor home mud flap measures 95” wide by 10″ to 12” tall. The custom cut out is usually centered on the mud flap and drops 1.5-3”.  The common widths of the cut out is 40” along the bottom of the cut out and 44” along the top edge; or 36″ along the bottom to 40″ at the top. All of these measurements are guidelines.  We custom cut the mud flap to fit your coach.  The size is to be specified by the coach owner and will be cut as requested.  We will send you information and a template to use for an accurate fit up after you order .  Or send us an e-mail and we can send this information to you for review ahead of time.

You get to tell us the text you want on your custom face plate, and the font to use.  We can crate custom graphics if you want graphics added.  There is an additional charge, and you will want to e-mail your image idea to; then phone your order in.

We will design the Custom text to your specifications.  We will create the design and send you a mock up for approval prior to having it laser cut.


This mud flap can be used on the back of motor homes that require a cut out designed to fit around a hitch that hangs more than a couple  inches below the body of your coach.  If your hitch is built up close to the coach body, please take a look at our straight top mud flaps.

Kit includes:

This motor home mud flap kit comes assembled and includes a thick double nylon reinforced rubber cut to your specified height; galvanized backing plate with drag lip; Stainless Steel Mirror Finish or Brushed Finish face plate 93” wide X 6” tall or 93″ wide X 4.5″ tall for coaches riding closer to the ground; powder coated hanging bracket with stainless steel  adjustable hanging ears; hanging hardware to include Chain, Closed Eye bolts, D Rings and Clevis Hooks.

Turn around may be up to 4 weeks.

Custom Sizing:

If your coach needs a shorter mud flap to keep it at least 4″ off the ground while driving, you may order it here.  Anything less then 8.75″ tall hanging below the cut out will use our 4.5″ tall face plate instead of the standard 6″ tall.  On the questionnaire, let us know the height you require.  If you require a mud flap taller than the 12” you will need to phone your custom order in. Extra height is an additional $15 per 1″.  Shipping costs will also increase due to UPS over-sized charges.  (541) 245-9148


There are no reviews yet.

Be the first to review “Motor Home Mud Flap with Drop Down and Custom Text”

Patented Drill-less Installation

  • Don’t add more holes to your truck – avoid additional rust spots.
  • NO guess work – Our Mudflaps are designed to be centered behind the tires.
  • Other mud flaps take more time and precision to install correctly and often require the removal of your tires to fit a drill into position.

Most Protection for your Truck

  • We offer FULL-size Mud Flaps for optimum protection of your vehicle and what you tow.
  • The others sell narrow, short splash guards, which do not provide the protection your truck deserves.

Perfect Fit Everytime

  • Only DuraFlap offers computerized cutting and custom sizes to provide the perfect fit every time.
  • Have a Modified Truck?  We are the only mud flap company that can custom fit a drill-less mud flap to your truck.

Best Materials

  • The DuraFlap Guarantee
  • 3/8″ thick Polyethylene/Rubber blend material – will not crack, peel, tear or fade.
  • Rain Grooves direct the rain, mud, and snow down to the road – Flat surfaces allow these to work their way around the mud flap to hit the truck
  • Anti Sail design – Reinforced edges keep the mud flap from flying up behind the vehicle as it moves down the road

Find Your Mudflap

See What People Are Saying

Fred in New York

December 17, 2017

Motor Home Fender Wells – some feedback from purchase made in August with motorhome that has tires that are out past the edge of unit, the stock flares do not do adequate job of keeping mud , stones, debris from getting all over the back sides of the unit. Installing your Duraflaps has made a huge difference on the ability to keep it clean and looking good.

Installation was relatively pain free only had to remove outside dual to gain easy access for drill and driver.

One incision to make bending around factory flare and good to go photos attached to add to your album, will recommend to others for sure installed on 2017 Concord 300DS by Coachman


See What People Are Saying

Check out our Installation Instructions here!

DuraFlap LLC Mudflaps should be washed with mild soapy water and towel dried. Occasionally apply any commercially available vinyl treatment or spray furniture polish to replace moisture to your mud flap.

Stainless steel weights can be cleaned with window cleaner or ammonia and water and towel dried.


DuraFlap LLC truck mudflaps are fully guaranteed for 5 years after initial purchase against defects in workmanship and materials. If a mud flap or its components should break, crack, fade or rust, DuraFlap LLC will replace that mud flap free of charge to the original purchaser. This does not include installation costs.


While DuraFlap LLC uses durable products, due to the abuse received by rear motor coach mudflaps we are unable to provide a full guarantee. If your mudflap is not free of defects when received, please phone DuraFlap LLC immediately for a replacement.

DuraFlap LLC motorhome products carry a limited 30-day warranty against manufacturers’ defects. This warranty does not cover tears or breaks sustained due to impact or dragging. All warranty returns require a return authorization number.


If for any other reason you are not happy with your decision to purchase DuraFlap LLC Mudflaps, you may return them within 30 days of delivery and in new condition. There is a 20% restocking fee for returns due to anything other than defects. You pay for the return shipping. If the product is damaged, or parts are missing, you will be charged for replacement of damaged or missing parts, in addition to the 20% restocking fee. These returns must be received within 30 days of the delivery date.  To obtain a return authorization number, please call (541) 245-9148.

Polished stainless steel weights are guaranteed not to rust. Scratches, dents, accidents etc. or any misuse are not covered by our guarantee. Installer should check for sufficient clearance of at least 3″ from the Mud flap to the tailpipe prior to installation. Movement of the tailpipe may be necessary to prevent melting of the mud flap.

DuraFlap does not accept any responsibility for the installation of mudflaps by individual customers, or by DuraFlap Dealers.


DuraFlap does not sell or share your information with others.  We do not want you to receive unwanted e-mails or phone calls.

The only companies that will receive your information would be the credit card processing service via a secure gateway, and the shipping company will receive your information to send automatic shipping notices.


Order Now

  • You can see the font options by clicking here (opens in a new window). If you do not find a font you like, call us with your own Font selection at (541) 245-9148
  • $0.00