Products

This is where you can add new products to your store.

STYLE# FR12 11 Raptor
NO Stainless Steel Weights
Price $95 pair

STYLE# FR12 11 Raptor SS
With Stainless Steel Weights
Price $125 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Ford Raptor Mud Flap Rear 12″ Wide Drill-less – Style# FR12 11 Raptor

This Ford Raptor Mud Flap is a Drill-less Mudflap, approximately 12 inches wide by 3/8 inch thick. Designed to hang approximately 10 inches below fender well.

Application: REAR of all 2011 thru 2014 FORD Raptor trucks with stock tires and stock suspension.

Mounting: DuraFlap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck. Instructions included.

Serviceability: This Mudflap is pre-drilled and requires no drilling of additional holes in your truck. Allows for easy & precise alignment, and drill-less installation.

Select options

STYLE# FR12L 11 Raptor
NO Stainless Steel Weights
Price $95 pair

STYLE# FR12L 11 Raptor SS
With Stainless Steel Weights
Price $135 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Mud Flap for Ford Raptor Rear 12″ Wide Extra Long Drill-less – StyleFR12L 11 Raptor

This Mud Flap for Ford Raptor is a Drill-less Mudflap, approximately 12 inches wide by 3/8 inch thick. Designed to hang approximately 12 inches below fender well.

Application: REAR of all 2011 thru 2014 FORD Raptor trucks with stock tires and a slight lift, or those wanting to protect a tow vehicle.

Mounting: DuraFlap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck. Instructions included.

Serviceability: This Mudflap is pre-drilled and requires no drilling of additional holes in your truck. Allows for easy & precise alignment, and drill-less installation.

Select options

STYLE# FR14 11 Raptor
NO Stainless Steel Weights
Price $105 pair

STYLE# FR14 11 Raptor SS
With Stainless Steel Weights
Price $145 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Ford Raptor Mud Flap Rear 14″ Wide Drill-less – Style FR14 11 Raptor

This Ford Raptor Mud Flap is a Drill-less Mudflap, approximately 14 inches wide by 3/8 inch thick. Designed to hang approximately 10 inches below fender well.

Application: REAR of all 2011 thru 2014 FORD Raptor trucks with extra wide tires.

Mounting: DuraFlap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck. Instructions included.

NOTE:  If you have after market wheels shifting your tires further out than the stock wheels, we can custom shift these mud flap to stay centered to your tires.  Fill out our questionnaire and we will e-mail you all the information you need to get the perfect fit.

Serviceability: This Mudflap is pre-drilled and requires no drilling of additional holes in your truck. Allows for easy & precise alignment, and drill-less installation.

Select options

STYLE# FR14L 11 Raptor
NO Stainless Steel Weights
Price $100 pair

STYLE# FR14L 11 Raptor SS
With Stainless Steel Weights
Price $140 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Mud Flap for Raptor F150 Rear 14″ Wide Extra Long Drill-less – Style# FR14L 11 Raptor

This Mud Flap for Raptor is a Drill-less Mudflap, approximately 14 inches wide by 3/8 inch thick. Designed to hang approximately 12 inches below fender well.

NOTE: If you have added the full inner fender well liner, the fit up is different. Let us know you have the liner on the questionnaire when ordering.

Application: REAR of all 2011 thru 2014 FORD Raptor trucks with extra wide tires and a slight lift, or those wanting to protect a tow vehicle.

Mounting: DuraFlap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck. Instructions included.

NOTE:  If you have after market wheels shifting your tires further out than the stock wheels, we can custom shift these mud flap to stay centered to your tires.  Fill out our questionnaire and we will e-mail you all the information you need to get the perfect fit.

Serviceability: This Mudflap is pre-drilled and requires no drilling of additional holes in your truck. Allows for easy & precise alignment, and drill-less installation.

Select options

STYLE# FR14 11 150
NO Stainless Steel Weights
Price $105 pair

STYLE# FR14 11 150 SS
With Stainless Steel Weights
Price $145 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Ford Mud Flap F-150 Rear 14″ Wide Drill-less – Style# FR14 11 150

This Ford Mud Flap is a Drill-less Mudflap, approximately 14 inches wide by 3/8 inch thick; designed to hang approximately 11 inches below the fender well.

Application: REAR of all 2011 thru 2014 models of F-150 trucks with oversized tires.

Mounting: DuraFlap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck. Instructions included.

NOTE:  If you have after market wheels shifting your tires further out than the stock wheels, we can custom shift these mud flap to stay centered to your tires.  Fill out our questionnaire and we will e-mail you all the information you need to get the perfect fit.

Serviceability: This Mudflap is Pre-Drilled and allows for easy & precise alignment. Please Note that if your truck does not have flares around the fender well, and you have added the optional rear fender well liner; this installation will require drilling thru the cloth fender well liner. If your truck does have the fender well flares, this is a drill-less installation.

To Order

STYLE# FR14L 11 150
NO Stainless Steel Weights
Price $110 pair

STYLE# FR14L 11 150 SS
With Stainless Steel Weights
Price $150 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Ford Mudflap for 2011-2014 F-150 Rear 14″ Wide Drill-less-Extra Long – Style# FR14L 11 150

This Ford Mudflap is a Drill-less Mudflap, approximately 14 inches wide by 3/8 inch thick; designed to hang approximately 13 inches below the fender well.

Application: REAR of all 2011 thru 2014 models of F-150 trucks with oversized tires, requiring extra length to protect a tow vehicle, or a truck with a slight lift.

Mounting: DuraFlap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck. Instructions included.

NOTE:  If you have after market wheels shifting your tires further out than the stock wheels, we can custom shift these mud flap to stay centered to your tires.  Fill out our questionnaire and we will e-mail you all the information you need to get the perfect fit.

Serviceability: This Mudflap is Pre-Drilled and allows for easy & precise alignment. Please Note that if your truck does not have flares around the fender well, and you have added the optional rear fender well liner; this installation will require drilling thru the cloth fender well liner. If your truck does have the fender well flares, this is a drill-less installation.

Select options

STYLE# CF12 07 SUV
NO Stainless Steel Weights
Price $90 pair

STYLE# CF12 07 SUV SS
With Stainless Steel Weights
Price $120 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Chevy 2007-2014 Front 12″ Wide Standard Drill-less Mudflaps – Style# CF12 07 SUV

This is approximately 12 inches wide by 3/8 inch thick, designed to hang approximately 8 inches below the fender well.

Application: FRONT of 2007 thru 2014 Tahoe, Suburban, Yukon, Avalanche and Escalade. This mud flap does not fit the Hybrid models.

Mounting: DuraFlap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck. Instructions included.

Serviceability: Mudflap is pre-drilled and requires no drilling of additional holes in your truck. Allows for easy & precise alignment, and drill-less installations.

 

Select options

STYLE# R12 Chevy SUV
NO Stainless Steel Weights
Price $75 pair

STYLE# R12 Chevy SUV
With Stainless Steel Weights
Price $105 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Mud Flap for Chevy / GMC SUV Rear 12″ Wide Universal Drilling Required – Style# R12 Chevy SUV

This Mud Flap is approximately 12 inches wide by 24 inches long by 3/8 inch thick.

Application: REAR 1992 thru 2007  Tahoe, Suburban, Yukon. Specially notched to fit around the angled sheet metal fender well that is present in 92 to current trucks.

Mounting: Included Stainless Steel self-tapping screws.

Serviceability: It’s ease of installation makes this a popular choice, great for dressing up your truck and when towing.

Select options

STYLE# F12 Chevy SUV
NO Stainless Steel Weights
Price $70 pair

STYLE# F12 Chevy SUV
With Stainless Steel Weights
Price $100 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Mudflap for Chevy / GMC SUV Front 12″ Wide Universal Drilling Required – Style# F12 Chevy SUV

This Mudflap for Chevy is approximately 12 inches wide by 20 inches long by 3/8 inch thick.

Application: FRONT 1992 thru 2007  Tahoe, Suburban, Yukon. Specially notched to fit around the angled sheet metal fender well that is present in 92 to current trucks.

Mounting: Included Stainless Steel self-tapping screws.

Serviceability: It’s ease of installation makes this a popular choice, great for dressing up your truck and when towing.

Select options

STYLE# F12 Dodge 03-09
NO Stainless Steel Weights
Price $70 pair

STYLE# F12 Dodge 03-09 SS
With Stainless Steel Weights
Price $100 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Dodge 2003-2009 Front 12″ Wide Standard Drilling Required Mudflap – Style# F12 Dodge 03-09

This Mudflap is approximately 12 inches wide by 22 inches long by 3/8 inch thick.

Application: FRONT of all full-size Dodge Ram 2003 thru 2009 pickups with non-stock lift and/or oversized wheels and tires. Instructions included.

Mounting: Included Stainless Steel bolts, nuts, washers and self-tapping screws.

Serviceability: Excellent protection for doors and running boards. Extra length available for lifted trucks.

Select options

STYLE# R12 03
NO Stainless Steel Weights
Price $75 pair

STYLE# R12 03 SS
With Stainless Steel Weights
Price $105 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Dodge 2003-2009 Rear 12″ Wide Standard Drilling Required Mudflap – Style# R12 03

This Mud Flap is approximately 12 inches wide by 25 inches tall by 3/8 inch thick.

Application: REAR of Dodge Ram 2003 thru 2009 with non-stock lift and/or oversized wheels and tires. Instructions includes.

Mounting: Included Stainless Steel self-tapping screws.

Serviceability: Best choice for mounting to the rear of any standard 2003 to current Dodge Ram Truck where our drill-less mudflaps can not be used.

Select options
flat bed mud flaps 12" X 25"

STYLE# Flat Bed 12″
NO Stainless Steel Weights
Price $75 pair

STYLE# Flat Bed 12″ SS
With Stainless Steel Weights
Price $105 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Mud Flap for Flat Bed Rear 12″ Wide Standard Drilling Required – Style# Flat Bed 12″

This Mud flap for Flat Bed is approximately 12 inches wide by 3/8 inch thick; cut to the custom length needed.  Enter the length needed under comments.

Application: REAR of Flat Bed Trucks with single rear wheels where the mud flap is to be placed right behind the tire.

Mounting: Included Stainless Steel bolts, nuts and washers.

Serviceability: This Mudflap is the Mudflap of choice for Single Rear Wheel Flat Bed trucks when the mud flap will be installed just behind the tires. Custom Lengths are available.

 

Select options
flat bed mud flaps 12" X 25"

STYLE# Flat Bed 14″
NO Stainless Steel Weights
Price $80 pair

STYLE# Flat Bed 14″ SS
With Stainless Steel Weights
Price $120 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Mud Flap for Flat Bed Rear 14″ Wide Standard Drilling Required – Style# Flat Bed 14″

This Mud flap for Flat Bed is approximately 14 inches wide by 3/8 inch thick by the length you need.  Let us know the length needed under comments.

Application: REAR of Flat Bed Trucks requiring a slightly wider mud flap to be placed toward the back of the bed.

Mounting: Included Stainless Steel bolts, nuts and washers.

Serviceability: This Mudflap is the Mudflap of choice for Single Rear Wheel Flat Bed trucks when the mud flap will be installed close behind the tires.  Different Lengths are available.

 

Select options
flat bed mud flaps 12" X 25"

STYLE# Flat Bed 16″
NO Stainless Steel Weights
Price $90 pair

STYLE# Flat Bed 16″ SS
With Stainless Steel Weights
Price $140 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Mud Flap for Flat Bed Rear 16″ Wide Standard Drilling Required – Style# Flat Bed 16″

This Mud flap for Flat Bed is approximately 16 inches wide by 3/8 inch thick by any length required.  Let us know the length needed under comments when ordering.

Application: REAR of Flat Bed Trucks requiring a slightly wider mud flap to be placed toward the back of the bed.

Mounting: Included Stainless Steel bolts, nuts and washers.

Serviceability: This Mudflap is the Mudflap of choice for Single Rear Wheel Flat Bed trucks when the mud flap will be installed toward the back of the truck requiring extra width.  Different Lengths are available.

 

Select options
20" wide flat bed mud flap

STYLE# Flat Bed 20″
NO Stainless Steel Weights
Price $100 pair

STYLE# Flat Bed 20″ SS
With Stainless Steel Weights
Price $150 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Flat Bed Rear 20″ Wide Standard Drilling Required Mudflap – Style# Flat Bed 20″

This Mudflap is approximately 20 inches wide by 3/8 inch thick cut to any length required.  Let us know the length needed under comments when ordering.

Application: REAR of Flat Bed Trucks requiring a wider mud flap to cover Dually wheels and tires, positioned within 4″ of the tires.

Mounting: Included Stainless Steel bolts, nuts and washers.

Serviceability: This Mudflap is the Mudflap of choice for Dually Flat Bed trucks when the mud flap will be installed in close proximity of the tires.

 

Select options
20" wide flat bed mud flap

STYLE# Flat Bed 24″
NO Stainless Steel Weights
Price $120 pair

STYLE# Flat Bed 24″ SS
With Stainless Steel Weights
Price $170 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Flat Bed Mud Flap Rear 24″ Wide Standard Drilling Required Mudflap – Style# Flat Bed 24″

This Flat Bed Mudflap is approximately 24 inches wide by 3/8 inch thick, cut to the length needed.  Let us know the length you want under comments.

Application: REAR of Flat Bed Trucks requiring a wider mud flap to cover Dually wheels and tires, hanging near the back of the truck.

Mounting: Included Stainless Steel bolts, nuts and washers.

Serviceability: This Mudflap is the Mudflap of choice for Dually Flat Bed trucks when the mud flap will be installed near the back of the truck.

 

Select options

STYLE# F12
NO Stainless Steel Weights
Price $70 pair

STYLE# F12 SS
With Stainless Steel Weights
Price $100 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Mud Flap Front 12″ Wide Universal Drilling Required – Style# F12

This Mudflap is approximately 12 inches wide by 20.5 inches tall by 3/8 inch thick.

Application: FRONT of all STOCK trucks, SUV’s and Vans. May be used on the rear of smaller trucks, SUV’s and Vans if our style 2X will not fit in the fender well.

Mounting: Included Stainless Steel self-tapping screws.

Serviceability: It’s ease of installation makes this a popular choice for earlier model trucks, Vans or SUV’s.

 

Select options

STYLE# F12L
NO Stainless Steel Weights
Price $75 pair

STYLE# F12L SS
With Stainless Steel Weights
Price $105 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Front 12″ Wide Extra Long Universal Mudflap Drilling Required – Style# F12L

This Mudflap is approximately 12 inches wide by 22.5 inches tall by 3/8 inch thick.

Application: FRONT of all trucks and SUV’s requiring a little longer mud flap due to a slight lift; or those wanting extra protection further back along the side of the truck. May be used on the rear of smaller trucks, SUV’s and Vans if our style 2X will not fit in the fender well.

Mounting: Included Stainless Steel self-tapping screws.

Serviceability: It’s ease of installation makes this a popular choice for earlier models or non-stock trucks or SUV.

Select options
Universal Mud Flap Front 14" wide

STYLE# F14
NO Stainless Steel Weights
Price $75 pair

STYLE# F14 SS
With Stainless Steel Weights
Price $115 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Front 14″ Wide Universal Mudflap Drilling Required – Style# F14

This Mudflap is approximately 14 inches wide by 22 inches long by 3/8 inch thick.

Application: FRONT of 1982 to current full-size pickups with oversize tires that require extra width coverage.

Mounting: Included Stainless Steel bolts, nuts and washers and one galvanized twist bracket per Mudflap.

Serviceability: Excellent choice on the rear for trucks used with extra wide tires for everyday town and hi-way use where towing requirements are light

Select options
Universal Mud Flap Front 14" wide

STYLE# F14L
NO Stainless Steel Weights
Price $85 pair

STYLE# F14L SS
With Stainless Steel Weights
Price $125 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Front 14″ Wide Extra Long Universal Mudflap Drilling Required – Style# F14L

This Mud Flap is approximately 14 inches wide by 24 inches tall by 3/8 inch thick.

Application: FRONT of all trucks, SUV’s and Vans with tires more than 11.5″ wide that need a little extra length due to a small lift or leveling kit.  May be used on the rear of smaller trucks, SUV’s and Vans if our style 8X will not fit in the fender well.

Mounting: Included Stainless Steel self tapping screws.

Serviceability: It’s ease of installation makes this a popular choice for earlier models or non-stock trucks or SUV.

Select options

STYLE# R12
NO Stainless Steel Weights
Price $75 pair

STYLE# R12 SS
With Stainless Steel Weights
Price $105 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Rear 12″ Wide Universal Mudflap Drilling Required – Style# R12

This Mudflap is approximately 12 inches wide by 22.5 inches tall by 3/8 inch thick.

Application: REAR of all models of full size trucks with stock tires and stock suspension. Allows flexibility for mounting both up and down as well as in and out.

Mounting: Included Stainless Steel self tapping screws, bolts, nuts, washers and one galvanized steel bracket per Mudflap.

Serviceability: This Mudflap is simple to install and offers more flexibility for adjustment of length or to center on the tire. Protects your paint and towables.

 

Select options

STYLE# R12L
NO Stainless Steel Weights
Price $80 pair

STYLE# R12L SS
With Stainless Steel Weights
Price $110 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Rear 12″ Wide Extra Long Universal Mudflap Drilling Required – Style# R12L

This Mudflap is approximately 12 inches wide by 25 inches tall by 3/8 inch thick.

Application: REAR of all models of full size trucks requiring extra length due to a slight lift, or taller tires. Allows flexibility for mounting both up and down as well as in and out.

Mounting: Included Stainless Steel self tapping screws, bolts, nuts, washers and one galvanized steel bracket per Mudflap.

Serviceability: This Mudflap is simple to install and offers more flexibility for adjustment of length or to center on the tire. Protects your paint and towables.

 

Select options

STYLE# R14 03
NO Stainless Steel Weights
Price $95 pair

STYLE# R14 03 SS
With Stailess Steel Weights
Price $135 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Dodge Rear 14″ Wide Universal Mudflap Drilling Required – Style# R14 03

This Mudflap is approximately 14 inches wide by 25 inches tall by 3/8 inch thick.

Application: REAR of 2003 thru 2009 Dodge Ram with  extra wide tires and wheels.

Mounting: Included Stainless Steel bolts, nuts, washers and self tapping screws.

Serviceability: For mounting to the rear of any 2003 to current Dodge Ram truck with oversized wheels and tires.  Instructions included.

Select options
img2C

Price $429

Shipping within the 48 Continental USA $80. All others must be phoned in.

Mud Flap for Beaver Motor Home cut straight across the top

This kit comes completely assembled and includes:

● 12″x 95″x .25″ commercial grade straight rubber mud flap
● Spread between hanging points is 44 inches
● 6″x 93″x 12 gauge Stainless steel face plate (w/logos)
● 6″x 93″x 11 gauge Formed galvanized back plate for strength
●Top bar e-coated black for durability and a finished look
● Mounting hardware assemblies for easy mounting

See our Custom Motor Home Mud Flap page if this is not the right size for your coach.  We recommend that the mud flap hang at least 4″ off the ground when in drive height.

 

Select options
drop-top-blankflap

Price: $530.00

Shipping is $80 in the US Continental States.  All others must phone in the order. (541) 245-9148

Mud flap for a Motor Home with Custom Drop Down and Blank Weight

This mud flap for a motor home measures 95” wide by 11″ to 12” tall. The custom cut out is usually centered on the mud flap and drops 2-3”.  The cut out is from 36 – 40” along the bottom of the cut out and 40 – 44” along the top edge. We cut the cut outs to your specifications.  We will send you information and a template to use for an accurate fit up after you order.  Or you can send us an e-mail and we will send this information to you for review ahead of time. You will need to phone your order in if you require a mud flap taller than the 12”.   Extra height is $15 for each additional 1″, and shipping cost will be more.

Application:

This mud flap can be used on the back of motor homes that require a cut out designed to fit around a hitch that hangs more than 2″ below the body of your coach. Take a look at our straight top mud flaps if your hitch is built up close to the coach body.

Kit includes:

This motor home mud flap kit comes assembled and includes a thick double nylon reinforced rubber cut to your specified height.  We also include a galvanized backing plate with drag lip, Stainless Steel Mirror Finish or Brushed Finish face plate 93” wide X 6” tall or 93″ wide X 4.5″ tall for coaches riding closer to the ground,  Our hanging hardware includes a powder coated angle iron hanging bracket with stainless steel  adjustable hanging ears, chain, Closed Eye bolts, D Rings and Clevis Hooks.

Select options
motor home mud flap

Price: $620.00

Shipping is $80 within the US Continental States.  All others need to phone in the order.

Motor Home Mud Flap with Drop Down and Custom Text

Description:

This motor home mud flap measures 95” wide by 11″ to 12” tall. The custom cut out is usually centered on the mud flap and drops 2-3”.  The common width of the cut out is 40” along the bottom of the cut out and 44” along the top edge. That size is to be specified by the coach owner and will be cut as requested.  We will send you information and a template to use for an accurate fit up after you order .  Or send us an e-mail and we can send this information to you for review ahead of time.

You get to tell us the text you want on your custom face plate, and the font to use.  We can crate custom graphics if you want graphics added.  There is an additional charge, and you will want to e-mail your image idea to info@duraflap.com; then phone your order in.

We will design the Custom text to your specifications.  We will create the design and send you a mock up for approval prior to having it laser cut.

Custom Sizing:

If your coach needs a shorter mud flap to keep it at least 4″ off the ground while driving, you may order it here.  Anything less then 8.75″ tall hanging below the cut out will use our 4.5″ tall face plate instead of the standard 6″ tall.  On the questionnaire, let us know the height you require.  If you require a mud flap taller than the 12” you will need to phone your custom order in. Extra height is an additional $15 per 1″.  Shipping costs will also increase due to UPS over-sized charges.  (541) 245-9148

Application:

This mud flap can be used on the back of motor homes that require a cut out designed to fit around a hitch that hangs more than a couple  inches below the body of your coach.  If your hitch is built up close to the coach body, please take a look at our straight top mud flaps.

Kit includes:

This motor home mud flap kit comes assembled and includes a thick double nylon reinforced rubber cut to your specified height; galvanized backing plate with drag lip; Stainless Steel Mirror Finish or Brushed Finish face plate 93” wide X 6” tall or 93″ wide X 4.5″ tall for coaches riding closer to the ground; powder coated hanging bracket with stainless steel  adjustable hanging ears; hanging hardware to include Chain, Closed Eye bolts, D Rings and Clevis Hooks.

Turn around may be up to 4 weeks.

Select options
WPChat