Product Order Form: Truck & SUV

Hidden

Setup The Form

Hidden

Set Product Category

Hidden

Set Front Rear Mud Flap

Hidden

Set Vehicle Year

Hidden

Set Width Taxonomy

Hidden

Set Length Taxonomy

Hidden

Set 2wd/4wd Taxonomy

Hidden

Set Customizations Taxonomy

Hidden

Set Weight Design Taxonomy

Hidden

SKU Element 1 Front

Hidden

SKU Element 3 Front/Rear (F/R)

Hidden

SKU Element 4 Middle

Hidden

WooSKU

Tell us about your vehicle

Confirm the Year of Your Truck(Required)

Additional Customizations on Your Truck

Are your wheels/tires aftermarket?(Required)

Aftermarket wheels/tires often move then wheel outboard slightly. In order to keep your mud flap centered, we will need to create a custom shift and thus require some measurements.

Yes

No

Is your truck lifted?(Required)

Yes

No

Additional Customizations on Your Dually

Are dually's wheels/tires aftermarket?(Required)

Aftermarket wheels/tires often move then wheel outboard slightly. In order to keep your mud flap centered, we will need to create a custom shift and thus require some measurements.

Yes

No

Is your dually lifted?(Required)

Yes

No

Standard Configuration

The Long version of this mud flap may hang less than 6” off the ground. Verify the length of your mud flaps based on your truck height.

Have you measured from the fender to the ground and confirmed your length choice?

Yes

No

How long do you want your lifted truck's mud flaps?(Required)

Custom Measurements

Will you have a rub issue?(Required)

To check for a potential rub issue, place a thick piece of cardboard in the wheel well where the mud flap will be installed, and have a helper turn the wheels. Our material is about 5/16” thick.

Yes

No

When your truck has the potential for a rub issue, we recommend our LFT set-back brackets. Click Here for Lifted Truck Flaps

We will custom shift our drill-less mud flaps to your offset wheels, so they will be centered to your tires. We also make them custom length for your lift.

VERY IMPORTANT: Custom mud flaps are non-returnable, so please measure carefully. We are available to walk you through the measuring to ensure you get the measurements correct.

Which hole are you measuring from?(Required)

On your vehicle, there may be several holes available. Please tell us which one you will be measuring from.

The Available Measurement Holes the Chevy 1500 Rear 2007.5 – 2013

Click Here for a Printable Worksheet

1. Factory Hole to Ground(Required)

Please enter the exact number of inches from factory hole to the ground.

2. Mud Flap Clearance from the Ground(Required)

We recommend 7-9" (most curb heights are 6"), 7" if towing a boat or trailer 9" no towing.

3. How wide do you want your mud flap?(Required)

Width choice may increase the price for weights. We will contact you after placing your order if this is the case.
Do you have a Dually? Shop Dually Mudflaps

Please enter a number from 0 to 19.