Motorhome Mud Flaps And RV Mudflaps

Motorhome Mud Flaps And RV Mudflaps by DURAFLAP.  Custom designed Motor home mud flaps.

Wheel well mud flaps

Our wheel well mud flaps are constructed of the same high-quality polyethylene/rubber material we use to produce our pick up mud flaps.  We custom make our wheel well mud flaps to our customers’ specifications (CLICK HERE for measuring guidelines)  You can order these from the flat bed mud flap page.

Rear mud flaps / splash guards

Our rear mud flaps are constructed from the finest materials available.  We utilize thick double nylon reinforced belting for longevity.  Our 14 gauge galvanized backing plate with a reinforcement bend optimizes strength and protection against road hazards and uses the drag lip when traversing steep inclines.

RV mud flaps

Our motorhome mud flaps use curved corners instead of straight corners, our mud flaps are resistant to the tearing that typically occurs at sharp corners.  Custom design faceplates are available for our RV mud flaps.  CLICK HERE for measurement guidelines.

Custom designs

Add customization to your rear mud flaps or RV mud flaps.  Choose from our catalog of over 100 custom designs or submit your own drawing or logo and we will create it for you.

Our custom designs are cut into 14-gauge mirror-finish STAINLESS STEEL, or choose our satin finished stainless steel to reduce sun glare for drivers behind you.

Prices will vary from coach to coach.

Prices depend on the height requirements of the Motor home mud flap, and the extent of the artwork design in the Stainless Steel weight.

Prices for the 3/8″ double reinforced rubber  replacement start at $160 for up to a 12″ height. Add an additional $15 for each additional inch of height.

Prices for the mudflap and hardware Without the Stainless steel weight Range from $280 – $330

Prices for Stainless Steel weight, and Galvanized backing plate range from $260 – $350

Complete Motorhome mud flaps range from $490 – $720

Shipping starts at $80 in the U.S.

Motorhome Mud Flap Options

straight-top-blankflap

Price:  $490.00

Shipping within the 48 Continental USA $80. All others please call.  (541) 245-9148

Mud Flap for a Motor Home with Straight Cut and a Blank Weight

Description:

This mud flap for a motor home measures 95” wide by 7” to 12” tall.  The top comes cut straight across.  If your coach needs a shorter mud flap to keep at least 4″ off the ground while driving, you may order it here.  Anything less then 8.5″ tall will use our 4.5″ tall face plate instead of the standard 6″ tall.  On the questionnaire, let us know the height of the mud flap you require.  If your coach needs a shorter mud flap, you may order it here.   If you require a mud flap taller than the 12” you will need to phone your custom order in. Extra height is an additional $15 per 1″.  Shipping costs will also increase due to the UPS charges for extra large packages.  (541) 245-9148

Application:

This motor home mud flap can be used on the back of motor homes that do not require the rubber to be cut around the tow hitch. It works great if your tow hitch does not hang more than 2″ below the body of your coach.

Kit includes

This motor home mud flap kit includes a 3/8” thick double nylon reinforced rubber cut to your specified height; galvanized backing plate with drag lip; Stainless Steel mirror finish weight 93” wide X 6” tall or 93″ wide x 4.5″ tall for coaches needing shorter mud flaps; powder coated hanging angle iron bracket with stainless steel hanging ears; powder coated flat bar for the rear side of the mud flap; hanging hardware to include closed eye bolts, chain, D Rings and Clevis Hooks.

Select options
motor home mud flap with straight top

Price : $580.00

Shipping is $80 within the Continental US States.  All others must phone in the order. (541) 245-9148

Motor Home Mud Flap with Custom Text and Straight Top

Description:

This motor home mud flap measures 95” wide by anywhere from 9” to 12” tall.  Taller mud flaps are available at additional cost.  The top comes cut straight across with angled outside edges.  You tell us the text you want on your custom face plate, and the font to use.  If you want graphics added, we can create it for you.  There is an additional charge, and you will want to e-mail your image idea to [email protected]; then phone your order in.

We will design the Custom faceplate to your specifications.  We will create the design and send you a mock up for approval prior to having it laser cut.  Your can select the mirror finish or brushed finish for the stainless steel faceplate.

Custom Sizing:

If your coach needs a shorter mud flap to keep it at least 4″ off the ground while driving, you may order it here.  Anything less then 8.5″ tall will use our 4.5″ tall face plate instead of the standard 6″ tall.  On the questionnaire, let us know the total height you require.  If you require a mud flap taller than the 12” you will need to phone your custom order in. Extra height is an additional $15 per 1″.  Shipping costs will also increase due to UPS over-sized charges.  (541) 245-9148

Application:

This motor home mud flap can be used on the back of motor homes that do not require the rubber to be cut around the tow hitch to close up the sides. It works great if your tow hitch does not hang more than 2″  below the body of your coach.

Kit includes

This motor home mud flap kit includes a 3/8” thick double nylon reinforced rubber belting cut to your specified height; galvanized backing plate with drag lip; Stainless Steel mirror finish face plate  93” wide X 6” tall or 93″ wide x 4.5″ tall for coaches needing shorter mud flaps; powder coated hanging angle iron bracket with stainless steel hanging ears; powder coated flat bar for the rear side of the mud flap; hanging hardware to include closed eye bolts, chain, D Rings and Clevis Hooks.

Turnaround may take up to 4 weeks.

Select options
drop-top-blankflap

Price: $530.00

Shipping is $80 in the US Continental States.  All others must phone in the order. (541) 245-9148

Mud flap for a Motor Home with Custom Drop Down and Blank Weight

This mud flap for a motor home measures 95” wide by 10″ to 12” tall. The custom cut out is usually centered on the mud flap and drops 1.5-3”.  The cut out is from 36 – 40” along the bottom of the cut out and 40 – 44” along the top edge. We cut the cut outs to your specifications.  We will send you information and a template to use for an accurate fit up after you order.  Or you can send us an e-mail and we will send this information to you for review ahead of time. You will need to phone your order in if you require a mud flap taller than the 12”.   Extra height is $15 for each additional 1″, and shipping costs will be more.

Application:

This mud flap can be used on the back of motor homes that require a cut out designed to fit around a hitch that hangs more than 2″ below the body of your coach. Take a look at our straight top mud flaps if your hitch is built up close to the coach body.

Kit includes:

This motor home mud flap kit comes assembled and includes a thick double nylon reinforced rubber cut to your specified height.  We also include a galvanized backing plate with drag lip, Stainless Steel Mirror Finish or Brushed Finish face plate 93” wide X 6” tall or 93″ wide X 4.5″ tall for coaches riding closer to the ground,  Our hanging hardware includes a powder coated angle iron hanging bracket with stainless steel  adjustable hanging ears, chain, Closed Eye bolts, D Rings and Clevis Hooks.

Select options
motor home mud flap

Price: $620.00

Shipping is $80 within the US Continental States.  All others need to phone in the order.

Motor Home Mud Flap with Drop Down and Custom Text

Description:

This motor home mud flap measures 95” wide by 10″ to 12” tall. The custom cut out is usually centered on the mud flap and drops 1.5-3”.  The common widths of the cut out is 40” along the bottom of the cut out and 44” along the top edge; or 36″ along the bottom to 40″ at the top. All of these measurements are guidelines.  We custom cut the mud flap to fit your coach.  The size is to be specified by the coach owner and will be cut as requested.  We will send you information and a template to use for an accurate fit up after you order .  Or send us an e-mail and we can send this information to you for review ahead of time.

You get to tell us the text you want on your custom face plate, and the font to use.  We can crate custom graphics if you want graphics added.  There is an additional charge, and you will want to e-mail your image idea to [email protected]; then phone your order in.

We will design the Custom text to your specifications.  We will create the design and send you a mock up for approval prior to having it laser cut.

Application:

This mud flap can be used on the back of motor homes that require a cut out designed to fit around a hitch that hangs more than a couple  inches below the body of your coach.  If your hitch is built up close to the coach body, please take a look at our straight top mud flaps.

Kit includes:

This motor home mud flap kit comes assembled and includes a thick double nylon reinforced rubber cut to your specified height; galvanized backing plate with drag lip; Stainless Steel Mirror Finish or Brushed Finish face plate 93” wide X 6” tall or 93″ wide X 4.5″ tall for coaches riding closer to the ground; powder coated hanging bracket with stainless steel  adjustable hanging ears; hanging hardware to include Chain, Closed Eye bolts, D Rings and Clevis Hooks.

Turn around may be up to 4 weeks.

Custom Sizing:

If your coach needs a shorter mud flap to keep it at least 4″ off the ground while driving, you may order it here.  Anything less then 8.75″ tall hanging below the cut out will use our 4.5″ tall face plate instead of the standard 6″ tall.  On the questionnaire, let us know the height you require.  If you require a mud flap taller than the 12” you will need to phone your custom order in. Extra height is an additional $15 per 1″.  Shipping costs will also increase due to UPS over-sized charges.  (541) 245-9148

Select options
WPChat