GMC Mud Flaps

Our GMC mud flaps are custom made from the finest quality materials available and designed not to tear, peel, fade, rust or break. Our no drill and our standard installation mud guards have an anti-sail design that prevents the mud flap from flying up behind the truck, giving your truck and vehicles around you, increased protection from rock chips.

Our GMC mud flaps are made with our exclusive “Rain Grooves” that direct rain, snow & road debris down and away from the vehicle. Flat surfaces allow liquids to work their way around the sides to continue to damage your vehicle.

Our full size truck mud flaps give your vehicle a more complete coverage that splash guards are not able to match. Custom designs are available for modified trucks with lifts, aftermarket flares and oversized wheels or tires.

Our drill-less installation mud flaps are available with or without our 304 Mirror Finished Stainless Steel weights, both styles use the same high quality materials and provide great protection. We also create our own custom artwork for these truck mud flaps.
GMC Mud Flaps
Models include 1500, 2500, 3500, 4500, Duallys, vans, and mud flaps for other models.

Refine Search

2020 Chevy Front Mud Flap

STYLE# GF 14 20
NO Stainless Steel Weights
Price $110 pair

STYLE# GF 14 20  SS
With Stainless Steel Weights
Price $155 pair

Shipping - Within the 48 Continental USA $26, Alaska/Hawaii is $50, Canada is $50-$75. All others please call.

GMC MudFlaps for 2020-current Front 14″ Wide Drill-less Mudflap – Style# GF14 20

This GMC Mud Flap is a Drill-less Installation, approximately 14 inches wide by 3/8 inch thick, designed to hang approximately 9 inches below the fender well.

Application: FRONT of 2020 – current GMC 2500/3500 stock pickups.

These mud flaps are designed to work with either the wider splashguards or the narrow splashguards that are more than 12″ wide.  If you have the narrow splashguard you may want to review our GF12 20 instead.

NOTE: For OverSized Tires that may rub on front mudflap.  Click to see our Oversized page.

Mounting: DuraFlap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck. Instructions included.

Since the splashguard is built into the GMC fender well trim, these mud flaps will be placed in front of the splashguard.

Serviceability: This Mud flap is pre-drilled and requires no drilling of additional holes in your truck metal. Allows for easy & precise alignment, and drill-less installation.

Due to the shape of the fender well this mud flap may have a very slight twist.

 

Select options
2020 Chevy Front Mud Flap

STYLE# GF 14L 20
NO Stainless Steel Weights
Price $115 pair

STYLE# GF 14L 20  SS
With Stainless Steel Weights
Price $160 pair

Shipping - Within the 48 Continental USA $26, Alaska/Hawaii is $50, Canada is $50-$75. All others please call.

GMC MudFlaps for 2020-current Front 14″ Wide Extra Long Drill-less- Style# GF14L 20

This GMC MudFlap is a Drill-less Installation, approximately 14 inches wide by 3/8 inch thick, designed to hang approximately 11 inches below the fender well.

Application: FRONT of 2020 – current GMC 2500/3500 pickups with a lift or level kit; and those wanting maximum protection for the side of their truck.  Also a great choice for dual rear wheel trucks to protect the wide rear fender well.

These mud flaps are designed to work with either the wider splashguards or the narrow splashguards.  If you have the narrow splashguard you may want to review our GF12L 20 instead.

NOTE: For OverSized Tires that may rub on front mudflap.  Click to see our Oversized page.

Mounting: DuraFlap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck. Instructions included.

Since the splashguard is built into the GMC fender well trim, these mud flaps will be placed in front of the splashguard.

Serviceability: This Mud flap is pre-drilled and requires no drilling of additional holes in your truck metal. Allows for easy & precise alignment, and drill-less installation.

Due to the shape of the fender well this mud flap may have a very slight twist.

 

Select options
GMC with small spalshguard and DuraFlap Mud flaps

STYLE# GR12 20
NO Stainless Steel Weights
Price $115 pair

STYLE# GR12 20 SS
With Stainless Steel Weights
Price $155 pair

Shipping - Within the 48 Continental USA $26, Alaska/Hawaii is $50, Canada is $50-$75. All others please call.

Mud Flap for GMC 2020-Current Rear 12″ Wide Drill-less – Style GR12 20

This Mud Flap for GMC 2020 is approximately 12 inches wide by 3/8 inch thick, designed to hang approximately 13 inches below the fender well.

Fits the REAR of the 2020 – current GMC 2500/3500 trucks with the narrower factory splash guard in place.

If you have the wider splashguard you will want to look at the GR14 20.

Mounting: DuraFlap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck. Instructions and hardware are included.

Since the splashguard is built into the GMC fender well trim, these mud flaps will be placed in front of the splashguard.

Serviceability: This Mud flap is pre-drilled and requires no drilling of additional holes in your truck metal. Allows for easy & precise alignment, and drill-less installation.

Select options
GMC with small spalshguard and DuraFlap Mud flaps

STYLE# GR12L 20
NO Stainless Steel Weights
Price $120 pair

STYLE# GR12L 20 SS
With Stainless Steel Weights
Price $160 pair

Shipping - Within the 48 Continental USA $26, Alaska/Hawaii is $50, Canada is $50-$75. All others please call.

MudFlap for GMC 2020-Current Rear 12″ Wide Extra Long Drill-less – Style GR12L 20

This MudFlap for GMC 2020 is approximately 12 inches wide by 3/8 inch thick, designed to hang approximately 15 inches below the fender well.

Fits the REAR of the 2020 – current GMC 2500/3500 trucks with the factory trim guard in place.  Hangs an extra 2″ for trucks with a slight lift and those protecting a boat or trailer. You will want to measure your truck to make sure these are at least 6″ off the ground to avoid backing up against curbs or parking guards.

These mud flaps are designed to work with the narrow splashguards.  If you have the wider splashguard you may want to review our GR14L 20 instead.

MOUNTING: Made of stainless steel where available the hardware will not rust. Other mounting products are made of anti-corrosive and rust resistant materials. Custom designed to utilize existing factory holes and other mounting points available on your truck. Instructions included.

Since the splashguard is built into the GMC fender well trim, these mud flaps will be placed in front of the splashguard.

SERVICEABILITY: No drilling of additional holes in your truck makes for a drill-less installation. Allows for easy & precise alignment, and drill-less installations.  These mud flaps will be installed in front of the factory trim guards.  The trim guards need to stay in place to avoid the gap in the lower panel behind the fender well.

 

Select options
2020 Chevy 2500 mud flap

STYLE# GR14 20
NO Stainless Steel Weights
Price $115 pair

STYLE# GR14 20 SS
With Stainless Steel Weights
Price $160 pair

Shipping - Within the 48 Continental USA $26, Alaska/Hawaii is $50, Canada is $50-$75. All others please call.

Mud Flap for GMC 2020-Current Rear 14″ Wide Drill-less – Style GR14 20

This Mud Flap for GMC 2020 is approximately 14 inches wide by 3/8 inch thick, designed to hang approximately 13 inches below the fender well and 6.5″ below the factory trim guard.

Fits the REAR of the 2020 – current GMC 2500/3500 trucks with the factory trim guard in place.

Made of stainless steel where available the hardware will not rust. Other mounting products are made of anti-corrosive and rust resistant materials. Custom designed to utilize existing factory holes and other mounting points available on your truck. Instructions included.

No drilling of additional holes in your truck makes for a drill-less installation. Allows for easy & precise alignment, and drill-less installations.  These mud flaps will be installed in front of the factory trim guards.  The trim guards need to stay in place to avoid the gap in the lower panel behind the fender well.

 

Select options
2020 Chevy/GMC rear mud flap

STYLE# GR14L 20
NO Stainless Steel Weights
Price $120 pair

STYLE# GR14L 20 SS
With Stainless Steel Weights
Price $165 pair

Shipping - Within the 48 Continental USA $26, Alaska/Hawaii is $50, Canada is $50-$75. All others please call.

MudFlap for GMC 2020-Current Rear 14″ Wide X-tra Long Drill-less – Style GR14L 20

This MudFlap for GMC 2020 is approximately 14 inches wide by 3/8 inch thick, designed to hang approximately 15 inches below the fender well and 8.5″ below the factory trim guard.

Fits the REAR of the 2020 – current GMC 2500/3500 trucks with the factory trim guard in place.  Hangs an extra 2″ for trucks with a slight lift and those protecting a boat or trailer. You will want to measure your truck to make sure these are at least 6″ off the ground to avoid backing up against curbs or parking guards.

Made of stainless steel where available the hardware will not rust. Other mounting products are made of anti-corrosive and rust resistant materials. Custom designed to utilize existing factory holes and other mounting points available on your truck. Instructions included.

No drilling of additional holes in your truck makes for a drill-less installation. Allows for easy & precise alignment, and drill-less installations.  These mud flaps will be installed in front of the factory trim guards.  The trim guards need to stay in place to avoid the gap in the lower panel behind the fender well.

 

Select options
4

STYLE# CR12 07 SUV
NO Stainless Steel Weights
Price $105 pair

STYLE# CR12 07 SUV SS
With Stainless Steel Weights
Price $145 pair

Shipping - Within the 48 Continental USA $26, Alaska/Hawaii is $50, Canada is $50-$75. All others please call.

Chevy SUV Mud Flap 2007-2014 Rear 12″ Wide Standard Drill-less Mudflap – Style# CR12 07 SUV

This Chevy SUV Mud Flap is approximately 12 inches wide by 3/8 inch thick, designed to hang approximately 8 inches below the fender well.

Application: REAR of 2007 thru 2014 Tahoe, Suburban, Yukon, Avalanche and Escalade. This mud flap does not fit the Hybrid models.

Mounting: Duraflap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck.

Serviceability: Mudflap is pre-drilled and requires no drilling of additional holes in your truck. Allows for easy & precise alignment, and drill-less installations.

Select options

STYLE# F10
NO Stainless Steel Weights
Price $50 pair

STYLE# F10 SS
With Stainless Steel Weights
Price $80 pair

Shipping - Within the 48 Continental USA $26, Alaska/Hawaii is $50, Canada is $50-$75. All others please call.

Small Universal Mudflap Front 10″ Wide Requires Drilling – Style# F10

This small universal mudflap is approximately 10 inches wide by 18 inches tall by 3/8 inch thick.

Application: FRONT of all 1982 thru Current small Pickups, SUV’s and Vans.

Mounting: Included Stainless Steel self tapping screws.

Serviceability: Its’ ease of installation makes this a popular choice for the smaller trucks, vans or SUVs.

This 10″ wide mudflap will fit the front of all 1982 thru Current small Pickups, SUV’s and Vans.

Select options

STYLE# R10
NO Stainless Steel Weights
Price $50 pair

STYLE# R10 SS
With Stainless Steel Weights
Price $80 pair

Shipping - Within the 48 Continental USA $26, Alaska/Hawaii is $50, Canada is $50-$75. All others please call.

Small Universal Mud Flap Rear 10″ Wide Requires Drilling – Style# R10

This small universal mud flap is approximately 10 inches wide by 21 inches tall by 3/8 inch thick.

Application: REAR of all 1982 thru Current smaller Pickups, SUV’s and Vans.

Mounting: Included Stainless Steel self tapping screws.

Serviceability: Its’ ease of installation makes this a popular choice for the smaller trucks, vans or SUVs.

Select options

STYLE# CF12
NO Stainless Steel Weights
Price $100 pair

STYLE# CF12 SS
With Stainless Steel Weights
Price $140 pair

Shipping - Within the 48 Continental USA $26, Alaska/Hawaii is $50, Canada is $50-$75. All others please call.

Front 12″ Wide 2001-2007 Drill-less Mudflap – Style# CF12

This is a Drill-less Mudflap, approximately 12 inches wide by 3/8 inch thick, designed to hang approximately 9 inches below the fender well.

Application: FRONT of all 2001 thru 2007 full-size and 1500 classic style pickups including 4WD.

Mounting: Duraflap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck. Instructions included.

Serviceability: This Mudflap is pre-drilled and requires no drilling of additional holes in your truck. Allows for easy & precise alignment, and drill-less installation.

Select options
WPChat