Finest Mud flaps for trucks and rvs

No Drill Mud Flaps

Ford Mud Flaps

Our Ford mud flaps are custom made from the finest quality materials available and designed not to tear, peel, fade, rust or break. Our no drill and our standard installation mud guards have an anti-sail design that prevents the mud flap from flying up behind the truck, giving your truck and vehicles around you, increased protection from rock chips.

Our Ford truck mud flaps are made with our exclusive “Rain Grooves” that direct rain, snow & road debris down and away from the vehicle. Flat surfaces allow liquids to work their way around the sides to continue to damage your vehicle.

Our full size mud flaps give your vehicle a more complete coverage that splash guards are not able to match. Custom designs are available for modified trucks with lifts, aftermarket flares and oversized wheels or tires.

Our drill-less installation mud flaps are available with or without our 304 Mirror Finished Stainless Steel weights, both styles use the same high quality materials and provide great protection. We also create our own custom artwork for these truck mud flaps.

Ford Mud Flaps

Models include F150, F250, F350, F450, Duallys, vans, and splash guards for other models.

Refine Search

Ford Explorer Mud Flap

STYLE# FF12 150 Plus
NO Stainless Steel Weights
Price $95 pair

STYLE# FF12 150 Plus SS
With Stainless Steel Weights
Price $125 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Ford F-150 Mudflap Front 12″ Wide Extra Long Pre Drilled Mudflap – Style FF12 150 Plus

This Ford F-150 Mudflap is a Pre-drilled Mudflap, approximately 12 inches wide by 3/8 inch thick. Designed to hang approximately 11 inches below fender well.

Application: FRONT of all 2004 thru 2010 FORD F-150 pickups with a small lift or slightly oversized tires. If your tires are oversized, you will want to make sure your tires will not rub on mud flaps hanging inside your fender well. This is especially important when turning the wheel.

Mounting: DuraFlap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. This pre-drilled mudflap is custom designed to utilize existing factory holes and other mounting points available on your truck.

Serviceability: This Mudflap is Pre-Drilled and allows for easy & precise alignment. Please Note that if your truck does not have flares around the fender well, this installation will require drilling one hole thru the plastic fender well liner. If your truck does have the fender well flares, this is a drill-less installation.

To Order
Ford Explorer Mud Flap

STYLE# FF14 150
NO Stainless Steel Weights
Price $95 pair

STYLE# FF14 150 SS
With Stainless Steel Weights
Price $135 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

F-150 Mud Flap Front 14″ Wide Pre-Drilled – Style FF14 150

This F-150 Mud Flap is a Pre-Drilled Mudflap, approximately 14 inches wide by 3/8 inch thick. Designed to hang approximately 9 inches below fender well.

Application: FRONT of all 2004 thru 2010 FORD F-150 pickups with a slight lift and oversized tires requiring extra protection. Make certain that your tires will not rub on the mud flaps when they hang down inside your fender well. If this is a problem, see our lifted truck page.

Mounting: DuraFlap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. This pre-drilled mudflap is custom designed to utilize existing factory holes and other mounting points available on your truck.

Serviceability: This Mudflap is Pre-Drilled and allows for easy & precise alignment. Please Note that if your truck does not have flares around the fender well, this installation will require drilling thru the plastic fender well liner. If your truck does have the fender well flares, this is a drill-less installation.

To Order
Ford Explorer Mud Flap

STYLE# FF14L 150 
NO Stainless Steel Weights
Price $100 pair

STYLE# FF14L 150 SS
With Stainless Steel Weights
Price $140 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

F150 Mud Flap Front 14″ Wide Extra Long Pre Drilled – Style# FF14L 150

This F150 Mud Flap is a Pre-drilled Mudflap, approximately 14 inches wide by 3/8 inch thick. Designed to hang approximately 11 inches below fender well.

Application: FRONT of all 2004 thru 2010 FORD F-150 pickups with a slight lift and over-sized tires requiring extra protection. Make certain that your tires will not rub on the mud flaps when they hang down inside your fender-well. If this is a problem, see our lifted truck page.

Mounting: DuraFlap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. This pre-drilled mudflap is custom designed to utilize existing factory holes and other mounting points available on your truck.

Serviceability: This Mudflap is Pre-Drilled and allows for easy & precise alignment. Please Note that if your truck does not have flares around the fender-well, this installation will require drilling thru the plastic fender-well liner. If your truck does have the fender-well flares, this is a drill-less installation.

To Order

STYLE# FR12 150
NO Stainless Steel Weights
Price $95 pair

STYLE# FR12 150 SS
With Stainless Steel Weights
Price $125 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Mud Flap for Ford F150 Rear 12″ Wide Drill-less – Style# FR12 150

This Mud Flap for Ford F150 a Drill-less Mudflap, approximately 12 inches wide by 3/8 inch thick; designed to hang approximately 11 inches below the fender well.

Application: REAR of all 2004 thru 2010 models of F-150 trucks with stock tires and stock suspension. NOTE: If you have added the full inner fender well liner, the fit up is different. Let us know on the questionnaire when ordering.

Mounting: DuraFlap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck. Instructions included.

Serviceability: This Mudflap is pre-drilled and requires no drilling of additional holes in your truck. Allows for easy & precise alignment, and drill-less installation.

To Order
Ford Explorer Mud Flap

STYLE# FF12 11 150
NO Stainless Steel Weights
Price $90 pair

STYLE# FF12 11 150 SS
With Stainless Steel Weights
Price $120 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Ford Mud Flap for 2011-2014 F-150 Front 12″ Wide Pre Drilled – Style FF12 11 150

This Ford Mud Flap is a Drill-less Mudflap, approximately 12 inches wide by 3/8 inch thick. Designed to hang approximately 9 inches below fender well.

Application: FRONT of all 2011 thru 2014 FORD F-150 pickups with stock wheels and tires.

Mounting: DuraFlap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck. Instructions included.

Serviceability: This Mudflap is Pre-Drilled and allows for easy & precise alignment. Please Note that if your truck does not have flares around the fender well, this installation will require drilling one hole thru the cloth fender well liner. If your truck does have the fender well flares, this is a drill-less installation.

To Order
Ford Explorer Mud Flap

STYLE# FF12 11 150 Plus
NO Stainless Steel Weights
Price $95 pair

STYLE# FF12 11 150 Plus SS
With Stainless Steel Weights
Price $125 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Ford F-150 Mud Flap Front 12″ Wide Extra Long Pre Drilled – Style# FF12 11 150 Plus

This Ford F150 Mud Flap is a Drill-less Mudflap, approximately 12 inches wide by 3/8 inch thick. Designed to hang approximately 11 inches below fender well.

Application: FRONT of all 2011 thru 2014 FORD F-150 pickups with a small lift or slightly oversized tires. If your tires are oversized, you will want to make sure your tires will not rub on mud flaps hanging inside your fender well. This is especially important when turning the wheel.

Mounting: DuraFlap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck. Instructions included.

Serviceability: This Mudflap is Pre-Drilled and allows for easy & precise alignment. Please Note that if your truck does not have flares around the fender well, this installation will require drilling thru the cloth fender well liner. If your truck does have the fender well flares, this is a drill-less installation.

To Order
Ford Explorer Mud Flap

STYLE# FF14 11 150
NO Stainless Steel Weights
Price $95 pair

STYLE# FF14 11 150 SS
With Stainless Steel Weights
Price $135 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Mudflap for Ford F150 Front 14″ Wide Pre Drilled – Style# FF14 11 150

This Mudflap for Ford F150 is a Drill-less Mudflap, approximately 14 inches wide by 3/8 inch thick. Designed to hang approximately 9 inches below fender well.

Application: FRONT of all 2011 thru 2014 FORD F-150 pickups with a slight lift and oversized tires requiring extra protection. Make certain that your tires will not rub on the mud flaps when they hang down inside your fender well. If this is a problem, see our lifted truck page.

Mounting: DuraFlap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck. Instructions included.

Serviceability: This Mudflap is Pre-Drilled and allows for easy & precise alignment. Please Note that if your truck does not have flares around the fender well, this installation will require drilling thru the cloth fender well liner. If your truck does have the fender well flares, this is a drill-less installation.

To Order
Ford Explorer Mud Flap

STYLE# FF14L 11 150 
NO Stainless Steel Weights
Price $100 pair

STYLE# FF14L 11 150 SS
With Stainless Steel Weights
Price $140 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Ford F-150 Mud Flap Front 14″ Wide Extra Long Pre Drilled – Style FF14L 11 150

This Ford F-150 Mud Flap is a Drill-less Mudflap, approximately 14 inches wide by 3/8 inch thick. Designed to hang approximately 11 inches below fender well.

Application: FRONT of all 2011 thru 2014 FORD F-150 pickups with a slight lift and oversized tires requiring extra protection. Make certain that your tires will not rub on the mud flaps when they hang down inside your fenderwell. If this is a problem, see our lifted truck page.

Mounting: DuraFlap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck. Instructions included.

Serviceability: This Mudflap is Pre-Drilled and allows for easy & precise alignment. Please Note that if your truck does not have flares around the fender well, this installation will require drilling thru the cloth fender well liner. If your truck does have the fender well flares, this is a drill-less installation.

To Order

STYLE# FR12 11 150
NO Stainless Steel Weights
Price $95 pair

STYLE# FR12 11 150 SS
With Stainless Steel Weights
Price $125 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Ford Mudflap for F150 2011-2014 Rear 12″ Wide Drill-less – Style FR12 11 150

This Ford Mudflap for F150 is a Drill-less Mudflap, approximately 12 inches wide by 3/8 inch thick; designed to hang approximately 11 inches below the fender well.

Application: REAR of all 2011 thru 2014 models of F-150 trucks with stock tires and stock suspension. NOTE: If you have added the full inner fender well liner, the fit up is different. Let us know on the questionnaire when ordering.

Mounting: DuraFlap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck. Instructions included.

Serviceability: This Mudflap is Pre-Drilled and allows for easy & precise alignment. Please Note that if your truck does not have flares around the fender well, and you have added the optional rear fender well liner; this installation will require drilling thru the cloth fender well liner. If your truck does have the fender well flares, this is a drill-less installation.

To Order

STYLE# FR 12L 11 150
NO Stainless Steel Weights
Price $100 pair

STYLE# FR 12L 11 150 SS
With Stainless Steel Weights
Price $130 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Ford F-150 Mud Flap Rear 12″ Wide Extra Long Drill-less – Style FR12L 11 150

This Ford F-150 Mud Flap is a  Drill-less Mudflap, approximately 12 inches wide by 3/8 inch thick; designed to hang approximately 13 inches below the fender well.

Application: REAR of all 2011 thru 2014 models of F-150 trucks requiring extra length to protect a tow vehicle, or a truck with a slight lift.

Mounting: DuraFlap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck. Instructions included.

Serviceability: This Mudflap is Pre-Drilled and allows for easy & precise alignment. Please Note that if your truck does not have flares around the fender well, and you have added the optional rear fender well liner; this installation will require drilling thru the cloth fender well liner. If your truck does have the fender well flares, this is a drill-less installation.

 

To Order

STYLE# FF12 11 EXP
NO Stainless Steel Weights
Price $90 pair

STYLE# FF12 11 EXP SS
With Stainless Steel Weights
Price $120 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Mud Flap for Ford Explorer 2011-2016 Front 12″ Wide Drill-less – Style# FF12 11 EXP

This Mud Flap for Ford Explorer is a Drill-less Mudflap, approximately 12 inches wide by 3/8 inch thick, designed to hang approximately 9 inches below the fender well.

Application: FRONT of all 2011 thru 2016 stock Ford Explorers.

Mounting: DuraFlap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck.

Serviceability: This Mudflap is pre-drilled and requires no drilling of additional holes in your Explorer. Allows for easy & precise alignment, and drill-less installation.

To Order

STYLE# FF12 EXD
NO Stainless Steel Weights
Price $90 pair

STYLE# FF12 EXD SS
With Stainless Steel Weights
Price $120 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Mud Flap for Ford Expedition 2007-2017 Front 12″ Wide Drill-less – Style# FF12 EXD

This is a pre-drilled Mud flap for Ford Expedition, approximately 12 inches wide by 3/8 inch thick, designed to hang approximately 8 inches below the fender well.

Application: FRONT of all 2007 thru 2017 stock Expeditions.

Mounting: Duraflap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck.  One hole will need to be drilled thru the fender well liner on some models.

Serviceability: This Mudflap is pre-drilled and requires no drilling of additional holes in the metal of your Expedition. Allows for easy & precise alignment, and drill-less installation.

To Order
fr2xexd

STYLE# FR12 EXD
NO Stainless Steel Weights
Price $95 pair

STYLE# FR12 EXD SS
With Stainless Steel Weights
Price $125 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Mud Flap for Ford Expedition 2007-2017 Rear 12″ Wide Drill-less – Style# FR12 EXD

This Mud Flap for Ford expedition is a Drill-less Mudflap, approximately 12 inches wide by 3/8 inch thick, designed to hang approximately 9 inches below the fender-well.

Application: Rear of all 2007 thru 2017 Expeditions.

Mounting: DuraFlap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes where available and other mounting points available on your truck. There are several different trim packages on the Expedition, so to insure that we send you the right mud flap for your trim package, you will want to measure the distance between the two holes in the fender well lip.  Include this measurement in your questionnaire comments section.

Serviceability: This Mudflap is pre-drilled and requires no drilling of additional holes in the metal of your Expedition. Allows for easy & precise alignment, and delete drill-less here drill-less installation.

To Order
ff2exc

STYLE# FF12 EXC
NO Stainless Steel Weights
Price $90 pair

STYLE# FF12 EXC SS
With Stainless Steel Weights
Price $120 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Ford Excursion Mud Flap 1999-2005 Front 12″ Wide Standard Drill-less – Style# FF12 EXC

This Ford Excursion Mudflap is approximately 12 inches wide by 3/8 inch thick, designed to hang approximately 8 inches below the fender-well.

Application: FRONT of all 2000 thru 2005 Stock Excursions.

Mounting: Duraflap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck.

Serviceability: This Mudflap is pre-drilled and requires no drilling of additional holes in your Excursion. Allows for easy & precise alignment, and drill-less installation.

To Order
ff2exc

STYLE# FR12 EXC
NO Stainless Steel Weights
Price $95 pair

STYLE# FR12 EXC SS
With Stainless Steel Weights
Price $125 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Ford Excursion Mudflap 1999-2005 Rear 12″ Wide Standard Drill-less Mudflap – Style# FR12 EXC

This Ford Excursion Mudflap is a Drill-less Mudflap, approximately 12 inches wide by 3/8 inch thick, designed to hang approximately 10 inches below the fender well.

Application: REAR of all 2000 thru 2005 Excursions.

Mounting: Duraflap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck.

Serviceability: Mudflap is pre-drilled and requires no drilling of additional holes in your truck. Allows for easy & precise alignment, and drill-less installation.

To Order

STYLE# FR12
NO Stainless Steel Weights
Price $95 pair

STYLE# FR12 SS
With Stainless Steel Weights
Price $125 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Mud Flap for Ford F-250/350 Rear 12″ Wide Drill-less Mudflap – Style# FR12

This Mud Flap for Ford F-250/350 is a Drill-less Mudflap, approximately 12 inches wide by 3/8 inch thick; designed to hang approximately 12 inches below the fender-well.

Application: REAR of all 1999 thru 2007 models of full size FORD trucks with stock tires and stock suspension.

Mounting: Duraflap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck.

Serviceability: Mudflap is pre-drilled and requires no drilling of additional holes in your truck. Allows for easy & precise alignment, and drill-less installation.

To Order

STYLE# FR12L
NO Stainless Steel Weights
Price $100 pair

STYLE# FR12L SS
With Stainless Steel Weights
Price $130 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Ford F250/F350 Mudflap Rear 12″ Wide Extra Long Drill-less Mudflap – Style# FR12L

This Ford F250/F350 Mudflap is a Drill-less Mudflap, approximately 12 inches wide by 3/8 inch thick; designed to hang approximately 14 inches below the fender-well.

Application: REAR of all 1999 thru 2007 models of full size FORD trucks with stock tires and stock suspension looking for extra protection of a towable.

Mounting: Duraflap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck.

Serviceability: Mudflap hangs lower to protect your towable as well as your truck. Mudflap is pre-drilled and requires no drilling of additional holes in your truck. Allows for easy & precise alignment, and drill-less installation.

To Order

STYLE# FR14
NO Stainless Steel Weights
Price $105 pair

STYLE# FR14 SS
With Stainless Steel Weights
Price $145 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Extra Wide Mud Flap for F-250/350 Rear 14″ Wide Drill-less – Style FR14

This extra wide mud flap is a Drill-less Mudflap, approximately 14 inches wide by 3/8 inch thick. Designed to hang approximately 12″ below the fender-well.

Application: REAR of all 1999 thru 2007 models of full size FORD pickups that have extra wide tires and wheels.

Mounting: Duraflap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck.

NOTE:  If you have after market wheels shifting your tires further out than the stock wheels, we can custom shift these mud flap to stay centered to your tires.  Fill out our questionnaire and we will e-mail you all the information you need to get the perfect fit.

Serviceability: It gives an extra 1″ coverage on both the inside and outside edge of the tire. Mudflap is pre-drilled and requires no drilling of additional holes in your truck. Allows for easy & precise alignment, and drill-less installation.

To Order

STYLE# FR14L
NO Stainless Steel Weights
Price $110 pair

STYLE# FR14L SS
With Stainless Steel Weights
Price $150 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Mud Flap extra wide for F250/350 Rear 14″ Wide Extra Long Drill-less – Style FR14L

This Ford Mud Flap extra wide is a Drill-less Mudflap, 14 inches wide by 3/8 inch thick; designed to hang approximately 14 inches below the fender-well. NOTE* Trucks with tires extending more than 1″ beyond fender, phone in order.

Application: REAR of all 1999 thru 2007 models of 4×4 Ford full size pickups with extra wide tires and wheels that would like the most protection for their towables. Also a great choice for lifted trucks wanting the extra length.

Mounting: Duraflap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck.

NOTE:  If you have after market wheels shifting your tires further out than the stock wheels, we can custom shift these mud flap to stay centered to your tires.  Fill out our questionnaire and we will e-mail you all the information you need to get the perfect fit.

Serviceability: Fits higher into the wheel well for extra protection. Mudflap is pre-drilled and requires no drilling of additional holes in your truck. Easy & precise alignment, and drill-less installation.

To Order

STYLE# FR12 08
NO Stainless Steel Weights
Price $95 pair

STYLE# FR12 08 SS
With Stainless Steel Weights
Price $125 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Ford No Drill Mud Flap for F250/350 Rear 12″ Wide – Style# FR12 08

This Ford No Drill Mud Flap for F250/350 is a Drill-less Mudflap, approximately 12 inches wide by 3/8 inch thick; designed to hang approximately 14 inches below the fender-well.

Application: REAR of all 2008 thru 2010 models of full-size FORD trucks with stock tires and stock suspension.

Mounting: Duraflap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck.

Serviceability: Mudflap is pre-drilled and requires no drilling of additional holes in your truck. Allows for easy & precise alignment, and drill-less installation.

To Order

STYLE# FR12L 08
NO Stainless Steel Weights
Price $100 pair

STYLE# FR12L 08 SS
With Stainless Steel Weights
Price $130 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Ford Mud Flap F250/350 Rear 12″ Wide Extra Long Drill-less – Style# FR12L 08

This Ford Mud Flap F250/350 is a Drill-less Mudflap, approximately 12 inches wide by 3/8 inch thick; designed to hang approximately 16 inches below the fender-well.

Application: REAR of all 2008 thru 2010 models of full-size FORD trucks with stock tires and stock suspension looking for extra protection of a towable, or those with a slight lift.

Mounting: Duraflap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck.

Serviceability: Mudflap hangs lower to protect your towable as well as your truck. Mudflap is pre-drilled and requires no drilling of additional holes in your truck. Allows for easy & precise alignment, and drill-less installation.

To Order

STYLE# FR14 08
NO Stainless Steel Weights
Price $105 pair

STYLE# FR14 08 SS
With Stainless Steel Weights
Price $145 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Ford extra wide Mud Flap for F250/F350 Rear 14″ Wide Drill-less – Style FR14 08

This Ford extra wide Mud Flap is a Drill-less Mudflap, approximately 14 inches wide by 3/8 inch thick. Designed to hang approximately 14″ below the fender-well.

Application: REAR of all 2008 thru 2010 models of full-size FORD pickups that have extra wide tires and wheels.

Mounting: Duraflap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck.

NOTE:  If you have after market wheels shifting your tires further out than the stock wheels, we can custom shift these mud flap to stay centered to your tires.  Fill out our questionnaire and we will e-mail you all the information you need to get the perfect fit.

Serviceability: Gives an extra 1″ coverage on both the inside and outside edge of the tire. Mudflap is pre-drilled and requires no drilling of additional holes in your truck. Allows for easy & precise alignment, and drill-less installation.

To Order

STYLE# FR14L 08
NO Stainless Steel Weights
Price $110 pair

STYLE# FR14L 08 SS
With Stainless Steel Weights
Price $150 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Mudflap for Ford F250/F350 Rear 14″ Wide Extra Long Drill-less – Style FR14L 08

This mudflap for Ford is a Drill-less Mudflap, 14 inches wide by 3/8 inch thick; designed to hang approximately 16 inches below the fender-well. NOTE* Trucks with tires extending more than 1″ beyond fender, phone in order.

Application: REAR of all 2008 thru 2010 models of 4×4 Ford full-size pickups with extra wide tires and wheels that would like the most protection for their towable. Also a great choice for lifted trucks wanting the extra length.

Mounting: Duraflap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck.

NOTE:  If you have after market wheels shifting your tires further out than the stock wheels, we can custom shift these mud flap to stay centered to your tires.  Fill out our questionnaire and we will e-mail you all the information you need to get the perfect fit.

Serviceability: Fits higher into the wheel well for extra protection. Mudflap is pre-drilled and requires no drilling of additional holes in your truck. Easy & precise alignment, and drill-less installation.

To Order
Ford Mud Flaps 2017 rear

STYLE# FR12 17
NO Stainless Steel Weights
Price $95 pair

STYLE# FR12 17 SS
With Stainless Steel Weights
Price $125 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Ford Mud Flap 2017-Current Rear 12″ Wide Drill-less – Style # FR12 17

This Ford mud flap is a drill-less Mudflap, approximately 12 inches wide by 3/8 inch thick; designed to hang approximately 15 inches below the fender-well.

Application: REAR of all 2017 thru Current models of full size FORD trucks with stock tires and stock suspension.

Mounting: Duraflap mounting hardware is custom made to be used on the Ford Aluminum body truck.  Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck.

Serviceability: This Ford drill-less mudflap is designed to work on the new aluminum bodied truck without creating future corrosion spots.

 

To Order
Ford Mud Flaps 2017 rear

STYLE# FR 12L 17
NO Stainless Steel Weights
Price $100 pair

STYLE# FR 12L 17 SS
With Stainless Steel Weights
Price $130 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Ford Mud flaps 2017-Current Rear 12″ Wide Extra Long Drill-less- FR12L 17

These Ford mud flaps 2017 is a drill-less Mudflap, approximately 12 inches wide by 3/8 inch thick; designed to hang approximately 17 inches below the fender well.

Application: REAR of all 2017 thru Current models of full size FORD trucks with stock tires and stock suspension looking for extra protection of a towable.

Mounting: Duraflap mounting hardware is custom made to be used on the Ford Aluminum body truck.  Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck.

Serviceability: Thes Ford Mud flaps are drill-less and requires no drilling of additional holes in your truck. Allows for easy & precise alignment, and drill-less installation.

 

To Order
Ford Mud Flaps 2017 rear

STYLE# FR14 17
NO Stainless Steel Weights
Price $105 pair

STYLE# FR14 17 SS
With Stainless Steel Weights
Price $145 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Ford Mud Flap 2017-Current Rear 14″ Wide Standard Drill-less – FR14 17

This Ford mud flap is a drill-less Mudflap, approximately 14 inches wide by 3/8 inch thick; designed to hang approximately 15 inches below the fender-well.

Application: REAR of all 2017 thru Current models of full size FORD trucks with oversized tires that require more coverage than the standard width can give, and stock suspension.

Mounting: Duraflap mounting hardware is custom made to be used on the Ford Aluminum body truck.  Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck.

NOTE:  If you have after market wheels shifting your tires further out than the stock wheels, we can custom shift these mud flap to stay centered to your tires.  Fill out our questionnaire and we will e-mail you all the information you need to get the perfect fit.

Serviceability: This drill-less mudflap is designed to work on the new aluminum bodied truck, utilizing aluminum brackets.

 

To Order
WPChat