Ford Mud Flaps

Our Ford mud flaps are custom made from the finest quality materials available and designed not to tear, peel, fade, rust or break. Our no drill and our standard installation mud guards have an anti-sail design that prevents the mud flap from flying up behind the truck, giving your truck and vehicles around you, increased protection from rock chips.

Our Ford truck mud flaps are made with our exclusive “Rain Grooves” that direct rain, snow & road debris down and away from the vehicle. Flat surfaces allow liquids to work their way around the sides to continue to damage your vehicle.

Our full size mud flaps give your vehicle a more complete coverage that splash guards are not able to match. Custom designs are available for modified trucks with lifts, aftermarket flares and oversized wheels or tires.

Our drill-less installation mud flaps are available with or without our 304 Mirror Finished Stainless Steel weights, both styles use the same high quality materials and provide great protection. We also create our own custom artwork for these truck mud flaps.

Ford Mud Flaps

Models include F150, F250, F350, F450, Duallys, vans, and splash guards for other models.

Ford Front Mud Flap with Heat Bend

STYLE F12 HB
NO Stainless Steel Weights
Price $95 pair

STYLE F12 SS HB
With Stainless Steel Weights
Price $125 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Ford Front 12″ Wide Standard Mudflap with Heat Bend – Style F12 HB

This Mud Flap is approximately 12 inches wide by 20 inches tall by 3/8 inch thick. The heat bend is typically a 20 degree bend placed 10” from the bottom of the mudflap, and leaves 10” of mud flap to be placed up inside the fender-well for attachment.

Application: FRONT of All stock 1977 thru 1998 Ford Pickups.

Mounting: Included Stainless Steel self tapping screws and washers.

Serviceability: This mudflap includes a heat bend which is required on older model Ford trucks to leave the mudflap hanging straight down instead of hanging with a backward angle. Its’ ease of installation makes this a popular choice for earlier model Fords.

To Order
Ford Front Mud Flap with Heat Bend

STYLE F12L HB
NO Stainless Steel Weights
Price $100 pair

STYLE F12L SS HB
With Stainless Steel Weights
Price $130 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Ford Front 12″ Wide Standard Mudflap with Heat Bend Extra Long – Style F12L HB

This Mud Flap is approximately 12 inches wide by 22 inches tall by 3/8 inch thick. The heat bend is typically a 20 degree bend placed 12” from the bottom of the mudflap, and leaves 10” of mud flap to be placed up inside the fender-well for attachment.

Application: FRONT of All stock 1977 thru 1998 Ford Pickups.

Mounting: Included Stainless Steel self tapping screws and washers.

Serviceability: This mudflap includes a heat bend which is required on older model Ford trucks to leave the mudflap hanging straight down instead of hanging with a backward angle. Its’ ease of installation makes this a popular choice for earlier model Fords.

To Order
Ford Front Mud Flap with Heat Bend

STYLE F14 HB
NO Stainless Steel Weights
Price $100 pair

STYLE F14 SS HB
With Stainless Steel Weights
Price $140 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Ford 14″ Wide Standard Front Mudflap with Heat Bend – Style# F14 HB

This Mud Flap is approximately 14 inches wide by 24 inches tall by 3/8 inch thick. The heat bend is typically a 20 degree bend placed 12” from the bottom of the mudflap, and leaves 12” of mud flap to be placed up inside the fender-well for attachment.

Application: FRONT of All 1977 thru 1998 Ford Pickups with wider tires.

Mounting: Included Stainless Steel self tapping screws and washers.

Serviceability: This mudflap includes a heat bend which is required on older model Ford trucks to leave the mudflap hanging straight down instead of hanging with a backward angle.

To Order
Ford Front Mud Flap with Heat Bend

STYLE F14L HB
NO Stainless Steel Weights
Price $110 pair

STYLE F14L SS HB
With Stainless Steel Weights
Price $150 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Ford 14″ Wide Standard Front Mudflap with Heat Bend Extra Long- Style# F14L HB

This Mud Flap is approximately 14 inches wide by 26 inches tall by 3/8 inch thick. The heat bend is typically a 20 degree bend placed 14” from the bottom of the mudflap, and leaves 12” of mud flap to be placed up inside the fender-well for attachment.

Application: FRONT of All 1977 thru 1998 Ford Pickups with wider tires.

Mounting: Included Stainless Steel self tapping screws and washers.

Serviceability: This mudflap includes a heat bend which is required on older model Ford trucks to leave the mudflap hanging straight down instead of hanging with a backward angle.

To Order
Ford Rear Mud Flap with Heat Bend

STYLE# R12 HB
NO Stainless Steel Weights
Price $100 pair

STYLE# R12 SS HB
With Stainless Steel Weights
Price $130 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Ford Rear 12″ Wide Standard Mudflap with Heat Bend – Style# R12 HB

This Mudflap is approximately 12 inches wide by 22 inches tall by 3/8 inch thick. The heat bend is typically a 20-degree bend placed 12” from the bottom of the mudflap, and leaves 10” of mud flap to be placed up inside the fender well for attachment.

Application: REAR of All 1977 thru 1998 Stock Ford Pickups.

Mounting: Included Stainless Steel bolts, nuts, washers and one galvanized steel bracket per Mudflap.

Serviceability: This mudflap includes a heat bend which is required on older model Ford trucks to leave the mudflap hanging straight down instead of hanging with a backward angle. This Mudflap is simple to install and offers more flexibility for adjustment of length or to center on the tire. Protects your paint and towables.

To Order
Ford Rear Mud Flap with Heat Bend

STYLE# R12L HB
NO Stainless Steel Weights
Price $105 pair

STYLE# R12L SS HB
With Stainless Steel Weights
Price $135 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Ford Rear 12″ Wide Standard Mudflap with Heat Bend Extra Long – Style# R12L HB

This Mudflap is approximately 12 inches wide by 24 inches tall by 3/8 inch thick. The heat bend is typically a 20-degree bend placed 14” from the bottom of the mudflap, and leaves 10” of mud flap to be placed up inside the fender well for attachment.

Application: REAR of All 1977 thru 1998 Stock Ford Pickups.

Mounting: Included Stainless Steel bolts, nuts, washers and one galvanized steel bracket per Mudflap.

Serviceability: This mudflap includes a heat bend which is required on older model Ford trucks to leave the mudflap hanging straight down instead of hanging with a backward angle. This Mudflap is simple to install and offers more flexibility for adjustment of length or to center on the tire. Protects your paint and towables.

To Order
Ford Rear Mud Flap with Heat Bend

STYLE# R14 HB
NO Stainless Steel Weights
Price $115 pair

STYLE# R14 SS HB
With Stainless Steel Weights
Price $155 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Ford 1978-1998 Rear 14″ Wide Standard Mudflap with Heat Bend – Style# R14 HB

This Mud Flap is approximately 14 inches wide by 24 inches tall by 3/8 inch thick. .The heat bend is typically a 20 degree bend placed 12” from the bottom of the mudflap, and leaves 12” of mud flap to be placed up inside the fender-well for attachment.

Application: FRONT of All 1977 thru 1998 Ford Pickups with wider tires.

Mounting: This Mudflap is bolted with included Stainless Steel bolts, nuts, washers and has two galvanized brackets per Mudflap to ensure stability in adverse conditions.

Serviceability: This mudflap includes a heat bend which is required on older model Ford trucks to leave the mudflap hanging straight down instead of hanging with a backward angle. This is a popular Mudflap for occasional RV pullers and trucks that tow. It offers great protection for your truck and your towables.

To Order
Ford Rear Mud Flap with Heat Bend

STYLE# R14L HB
NO Stainless Steel Weights
Price $120 pair

STYLE# R14L HB SS
With Stainless Steel Weights
Price $160 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Ford Rear 14″ Wide Extra Long Standard Mudflap with Heat Bend – Style# R14L HB

This Mudflap is approximately 14 inches wide by 27 inches tall by 3/8 inch thick. The heat bend is typically a 20 degree bend placed 15” from the bottom of the mudflap, and leaves 12” of mud flap to be placed up inside the fender well for attachment.

Application: REAR of All 1977 thru 1998 Ford Pickup with wider tires, and requiring extra length due to a lift or to protect a boat or trailer.

Mounting: This Mudflap is bolted with included Stainless Steel bolts, nuts and washers and has two galvanized brackets per Mudflap to ensure stability in adverse condition.

Serviceability: This mudflap includes a heat bend which is required on older model Ford trucks to leave the mudflap hanging straight down instead of hanging with a backward angle. Mudflap of choice for professional hi way haulers and those that demand the maximum in protection for both their truck and towable.

To Order

STYLE# FF12 EVAN
NO Stainless Steel Weights
Price $70 pair

STYLE# FF12 EVAN SS
With Stainless Steel Weights
Price $100 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Ford E-Van MudFlap Front 12″ Wide Standard – Style# FF12 EVAN

This Ford E-Van mudflap is 12 inches wide by 20 inches by 3/8 inch thick.

Application: FRONT of all 2005 thru Current E-Vans.

Mounting: DuraFlap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. The installation hardware includes Self Tapping Screws & Custom Brackets for mounting.

Serviceability: This Mudflap is designed for easy and sturdy installation.

To Order

STYLE# FR 12 EVAN
NO Stainless Steel Weights
Price $75 pair

STYLE# FR 12 EVAN SS
With Stainless Steel Weights
Price $105 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Ford E-VAN Mud Flap Rear 12″ Wide Standard Mudflap – Style# FR12 EVAN

This Ford E-Van mud flap is approximately 12 inches wide by 23 inches long by 3/8 inch thick.

Application: REAR of all 2005 thru Current E-Vans.

Mounting: Duraflap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. The hardware includes Self Tapping Screws &  Custom Brackets for mounting.

Serviceability: This Mudflap is designed for easy and sturdy installation.

To Order

STYLE# F10
NO Stainless Steel Weights
Price $50 pair

STYLE# F10 SS
With Stainless Steel Weights
Price $80 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Universal Front 10″ Wide Universal Mudflap Requires Drilling – Style# F10

This is approximately 10 inches wide by 18 inches tall by 3/8 inch thick.

Application: FRONT of all 1982 thru Current small Pickups, SUV’s and Vans.

Mounting: Included Stainless Steel self tapping screws.

Serviceability: Its’ ease of installation makes this a popular choice for the smaller trucks, vans or SUVs.

This 10″ wide mudflap will fit the front of all 1982 thru Current small Pickups, SUV’s and Vans.

To Order

STYLE# R10
NO Stainless Steel Weights
Price $50 pair

STYLE# R10 SS
With Stainless Steel Weights
Price $80 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Universal Rear 10″ Wide Universal Mudflap Requires Drillling – Style# R10

This is approximately 10 inches wide by 21 inches tall by 3/8 inch thick.

Application: REAR of all 1982 thru Current smaller Pickups, SUV’s and Vans.

Mounting: Included Stainless Steel self tapping screws.

Serviceability: Its’ ease of installation makes this a popular choice for the smaller trucks, vans or SUVs.

To Order
Ford Explorer Mud Flap

STYLE# FF12
NO Stainless Steel Weights
Price $90 pair

STYLE# FF12 SS
With Stainless Steel Weights
Price $120 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Ford F-250/350 Front 12″ Wide Standard Drill-less Mudflap – Style# FF12

This Ford Mud Flap is a Drill-less Mudflap, approximately 12 inches wide by 3/8 inch thick, designed to hang approximately 6 inches below the fender-well on a 2WD and 9 inches below the fender-well on a 4X4.

Application: FRONT of all 1999 thru 2007 full-size pickups including 4WD.

Mounting: Duraflap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck.

Serviceability: This Mudflap is pre-drilled and requires no drilling of additional holes in your truck. Allows for easy & precise alignment, and drill-less installation.

To Order
Ford Explorer Mud Flap

STYLE# FF12 Plus
NO Stainless Steel Weights
Price $95 pair

STYLE# FF12 Plus SS
With Stainless Steel Weights
Price $125 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Ford Mud Flap F250 / F350 Front 12″ Wide Extra Long Drill-less – Style# FF12 Plus

This Ford Mud Flap is a Drill-less Mudflap, approximately 12 inches wide by 3/8 inch thick, designed to hang approximately 11 inches below the fender well.

Application: FRONT of all 1999 thru 2007 full size pickups with a slight lift, or those wanting additional protection further back.

Mounting: DuraFlap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck.

Serviceability: This Mudflap is pre-drilled and requires no drilling of additional holes in your truck. Allows for easy & precise alignment, and drill-less installation.

To Order
Ford Mud Flap

STYLE# FF12 08 2WD
NO Stainless Steel Weights
Price $90 pair

STYLE# FF12 08 2WD SS
With Stainless Steel Weights
Price $120 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Ford F250 – F350 Mud Flap Front 12″ Wide Drill-less – Style# FF12 08 2WD

This Ford F250 – F350 Mud Flap is a Drill-less Mudflap, approximately 12 inches wide by 3/8 inch thick, designed to hang approximately 9 inches below the fender-well.

Application: FRONT of all  2 wheel drive 2008 thru 2010 full-size pickups.

Mounting: Duraflap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck.

Serviceability: This Mudflap is pre-drilled and requires no drilling of additional holes in your truck. Allows for easy & precise alignment, and drill-less installation.

To Order

STYLE# FF12 08
NO Stainless Steel Weights
Price $90 pair

STYLE# FF12 08 SS
With Stainless Steel Weights
Price $120 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Ford F250 F350 Mud Flap Front 12″ Wide Drill-less – Style# FF12 08

This Ford F250 F350 Mud Flap is a Drill-less Mudflap, approximately 12 inches wide by 3/8 inch thick, designed to hang approximately 9 inches below the fender well.

Application: FRONT of all 2008 thru 2010 full-size pickups.

Mounting: Duraflap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck.

Serviceability: This Mudflap is pre-drilled and requires no drilling of additional holes in your truck. Allows for easy & precise alignment, and drill-less installation.

To Order

STYLE# FF12 08 Plus
NO Stainless Steel Weights
Price $95 pair

STYLE# FF12 08 Plus SS
With Stainless Steel Weights
Price $125 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Ford F250/350 Mudflap Front 12″ Wide Extra Long Drill-less – Style# FF12 08 Plus

This F250/350 Mudflap is a Drill-less Mudflap, approximately 12 inches wide by 3/8 inch thick, designed to hang approximately 11 inches below the fender well.

Application: FRONT of all 2008 thru 2010 full-size pickups with slight lift, or those wanting additional protection further back.

Mounting: DuraFlap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck..

Serviceability: This Mudflap is pre-drilled and requires no drilling of additional holes in your truck. Allows for easy & precise alignment, and drill-less installation.

To Order
Ford Mud Flap

STYLE# FF14 08 
NO Stainless Steel Weights
Price $95 pair

STYLE# FF14 08 Plus SS
With Stainless Steel Weights
Price $135 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Ford Mud Flap for F-250/350 Front 14″ Wide Drill-less – Style FF14 08

This Ford Mud Flap is a Drill-less Mudflap, approximately 14 inches wide by 3/8 inch thick, designed to hang approximately 9 inches below the fender well.

Application: FRONT of all 2008 thru 2010 full-size pickups with tires that measure more than 11.5″ wide, or those looking for more protection.

Mounting: DuraFlap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck.

Serviceability: This Mudflap is pre-drilled and requires no drilling of additional holes in your truck. Allows for easy & precise alignment, and drill-less installation. You will want to make sure your larger tires will not rub on a mud flap hanging straight down inside the fender well.

To Order

STYLE# FF14L 08 
NO Stainless Steel Weights
Price $100 pair

STYLE# FF14L 08 SS
With Stainless Steel Weights
Price $140 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Ford Mud Flaps 2008-2010 Front 14″ Wide Extra Long Drill-less Mudflap – Style# FF14L 08

These Ford Mud Flaps are a Drill-less Mudflap, approximately 14 inches wide by 3/8 inch thick, designed to hang approximately 11 inches below the fender well.

Application: FRONT of all 2008 thru 2010 full-size pickups with slight lift, or those wanting additional protection further back; with tires that measure more than 11.5″ wide.

Mounting: DuraFlap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck.

Serviceability: This Mudflap is pre-drilled and requires no drilling of additional holes in your truck. Allows for easy & precise alignment, and drill-less installation. You will want to make sure your larger tires will not rub on a mud flap hanging straight down inside the fender well.

To Order
Ford Explorer Mud Flap

STYLE# FF14
NO Stainless Steel Weights
Price $95 pair

STYLE# FF14 SS
With Stainless Steel Weights
Price $135 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Ford Mud Flap F-250/350 Front 14″ Wide Drill-less – Style# FF14

This Ford Mud Flap is a Drill-less Mudflap, approximately 14 inches wide by 3/8 inch thick, designed to hang approximately 6 inches below the fender-well on a 2WD and 9 inches below the fender-well on a 4X4.

Application: FONT of all 1999 thru 2007 full size pickups with wider tires including 4WD.

Mounting: Duraflap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck.

Serviceability: This Mudflap is pre-drilled and requires no drilling of additional holes in your truck. Allows for easy & precise alignment, and drill-less installation.

To Order

STYLE# FF14L
NO Stainless Steel Weights
Price $100 pair

STYLE# FF14L SS
With Stainless Steel Weights
Price $140 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Ford Mudflap F-250/350 Front 14″ Wide Extra Long Drill-less – Style# FF14L

This Ford Mudflap is a Drill-less Mudflap, approximately 14 inches wide by 3/8 inch thick, designed to hang approximately 11 inches below the fender well.

Application: FRONT of all 1999-2007 full size pickups with slight lift, or those wanting additional protection further back; with tires that measure more than 11.5″ wide.

Mounting: DuraFlap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck.

Serviceability: This Mudflap is pre-drilled and requires no drilling of additional holes in your truck. Allows for easy & precise alignment, and drill-less installation. You will want to make sure your larger tires will not rub on a mud flap hanging straight down inside the fender well.

To Order
ff2-11-450

STYLE# FF12 17 450
NO Stainless Steel Weights
Price $100 pair

STYLE# FF12 17 450 SS
With Stainless Steel Weights
Price $130 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Ford F450 Mud Flap 2017-current Front 12″ Wide Drill-less – Style# FF12 17 450

This Ford F450 Mud Flap is a Drill-less Mud flap, approximately 12 inches wide by 3/8 inch thick, designed to hang approximately 9 inches below the fender-well.

Application: FRONT of all 2017 thru current F450 Pickups.

Mounting: Duraflap mounting hardware is custom made to be used on the Ford Aluminum body truck.  Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck.

Serviceability: This Mudflap is pre-drilled and requires no drilling of additional holes in your truck. Allows for easy & precise alignment, and drill-less installation.

 

To Order
ff2-11-450

STYLE# FF 12L 17 450 
NO Stainless Steel Weights
Price $105 pair

STYLE# FF 12L 17 450 SS
With Stainless Steel Weights
Price $135 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Ford F450 Mud Flap 2017-current Front 12″ Wide Extra Long Drill-less – Style# FF12L 17 450

This Ford F450 Mud flap is a Drill-less installation, approximately 12 inches wide by 3/8 inch thick, designed to hang approximately 11 inches below the fender-well.

Application: FRONT of all 2017 thru current F450 Pickups wanting extra protection for the fat fender wells in the back.

Mounting: Duraflap mounting hardware is custom made to be used on the Ford Aluminum body truck.  Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck.

Serviceability: This Mudflap is pre-drilled and requires no drilling of additional holes in your truck. Allows for easy & precise alignment, and drill-less installation.

 

To Order
ff2-11-450

STYLE# FF12 11 450
NO Stainless Steel Weights
Price $100 pair

STYLE# FF12 11 450 SS
With Stainless Steel Weights
Price $130 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

F450 Mud Flap 2011-2016 Front 12″ Wide Drill-less – Style# FF12 11 450

This F450 Mud flap is a drill-less installation, approximately 12 inches wide by 3/8 inch thick, designed to hang approximately 9 inches below the fender-well.

Application: FRONT of all 2011 thru 2016 F450 Pickups.

Mounting: Duraflap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck.

Serviceability: This Mudflap is pre-drilled and requires no drilling of additional holes in your truck. Allows for easy & precise alignment, and drill-less installation.

To Order
ff208450

STYLE# FF12 08 450
NO Stainless Steel Weights
Price $100 pair

STYLE# FF12 08 450 SS
With Stainless Steel Weights
Price $130 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Mud Flap for F450 Front 2008-2010 12″ Wide Drill-less – Style# FF12 08 450

This Mud Flap for F450 is a Drill-less Ford Mudflap, approximately 12 inches wide by 3/8 inch thick, designed to hang approximately 9 inches below the fender-well.

Application: FRONT of all 2008 thru 2010 450 & 550 Pickups.

Mounting: Duraflap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck.

Serviceability: This Mudflap is pre-drilled and requires no drilling of additional holes in your truck. Allows for easy & precise alignment, and drill-less installation.

To Order
ff208450

STYLE# FF14 17 450
NO Stainless Steel Weights
Price $105 pair

STYLE# FF14 17 450 SS
With Stainless Steel Weights
Price $145 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

F-450 Mud Flap 2017-current Front 14″ Wide Drill-less – Style FF14 17 450

This F-450 Mud Flap is a Drill-less Mudflap approximately 14 inches wide by 3/8 inch thick, designed to hang approximately 9 inches below the fender-well.

Application: FRONT of all 2017 thru current 450 & 550 trucks for those wanting extra protection down the side .

Mounting: Duraflap mounting hardware is custom made to be used on the Ford Aluminum body truck.  Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck.

Serviceability: This Mudflap is pre-drilled and requires no drilling of additional holes in your truck. Allows for easy & precise alignment, and drill-less installation.

 

To Order
WPChat