Dodge Mud Flaps

Custom Dodge Mud Flaps are made from the finest quality materials available, and they will not to tear, peel, fade, rust or break. DuraFlap uses an anti-sail design on the no drill and standard installation mud guards.  As a result, this exclusive design prevents the mud flap from flying up behind the truck.  This gives your truck and vehicles around you increased protection from rock chips, and prevents broken windows.  DuraFlap uses quality designed “Rain Grooves” on the tire side of the mud flaps.   Damaging rain, snow & road debris are directed down and away from the vehicle. Flat surface styles allow liquids to work their way around the sides to continue back, and damage your vehicle.

Full size mud flaps give your vehicle more complete coverage than splash guards are not able to match. Therefore providing more protection and saving you money on future paint jobs.

Custom designs are available for modified trucks with lifts, aftermarket flares and over-sized wheels or tires ONLY by DuraFlap.

Customers can buy drill-less installation mud flaps with or without our 304 Mirror Finished Stainless Steel weights.  Both styles use the same high quality materials and provide great protection. Our stainless steel will not rust.  We also create our own custom artwork for these Dodge mud flaps.
 DODGE MUD FLAPS
Models include Ram 1500, Ram 2500, Ram 3500, Ram 4500, Duallys, and splash guards for other models.

Refine Search

Mud flap for Dodge 4500

STYLE# DF14 10 4500
NO Stainless Steel Weights
Price $130 pair

STYLE# DF14 10 4500 SS
With Stainless Steel Weights
Price $175 pair

Shipping - Within the 48 Continental USA $26, Alaska/Hawaii is $50, Canada is $50-$75. All others please call.

Mud Flap for Dodge 4500 Front 2010-2018 14″ Wide Drill-less – Style# DF14 10 4500

This Mud flap for Dodge 4500 is a drill-less installation, approximately 14 inches wide by 3/8 inch thick, designed to hang approximately 10 inches below the fender well.

Application: FRONT of Dodge 4500/5500 2010 thru Current pickups, desiring optimum coverage.

Mounting: DuraFlap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available o n your truck. Instructions included.

Serviceability: Mudflap is pre-drilled and requires no drilling of additional holes in your truck. Allows for easy & precise alignment, and drill-less installation. This mudflap is cut to go around the fender well flares, allowing for easy positioning.

 

Select options
Mud Flaps for Dodge Front

STYLE# DF12 10
NO Stainless Steel Weights
Price $100 pair

STYLE# DF12 10 SS
With Stainless Steel Weights
Price $140 pair

Shipping - Within the 48 Continental USA $26, Alaska/Hawaii is $50, Canada is $50-$75. All others please call.

Dodge Mud Flap 2010-2013 Front 12″ Wide Drill-less – Style# DF12 10

This Dodge Mud Flap is a Drill-Less Mudflap, approximately 12 inches wide by 3/8 inch thick. Designed to hang approximately 8 inches below the fender well on a 4WD and hang approximately 7 inches below the fender well on a 2WD.

Application: FRONT of all  Single Rear Wheel size Dodge 2010 thru 2013 AND all Dual Rear Wheel Dodge 2010-2012 pickups.

Mounting: Duraflap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck. Instructions included.

Serviceability: Mudflap is pre-drilled and requires no drilling of additional holes in your truck. Allows for easy & precise alignment, and drill-less installation. This mudflap is cut to go around the hump in your wheel well, allowing for easy positioning. If you have aftermarket flares on your truck, and the protective cap inside the lower center of the front fender well is removed, let us know on the questionnaire under comments so we can send you the correct fitting mud flaps.

Select options
Mud Flaps for Dodge Front

STYLE# DF12L 10 
NO Stainless Steel Weights
Price $105 pair

STYLE# DF12L 10 SS
With Stainless Steel Weights
Price $145 pair

Shipping - Within the 48 Continental USA $26, Alaska/Hawaii is $50, Canada is $50-$75. All others please call.

Mud Flap for Dodge 2010-2013 Front 12″ Wide Extra Long Drill-less-Style# DF12L 10

This mud flap for Dodge is a Drill-Less Mudflap, approximately 12 inches wide by 3/8 inch thick. Designed to hang approximately 10 inches below the fender well on a 4WD.

Application: FRONT of all  Single Rear Wheel size Dodge 2010 thru 2013 AND all Dual Rear Wheel Dodge 2010-2012 pickups.

Mounting: Duraflap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck. Instructions included.

Serviceability: Mudflap is pre-drilled and requires no drilling of additional holes in your truck. Allows for easy & precise alignment, and drill-less installation. This mudflap is cut to go around the hump in your wheel well, allowing for easy positioning. If you have aftermarket flares on your truck, and the protective cap inside the lower center of the front fender well is removed, let us know on the questionnaire under comments so we can send you the correct fitting mud flaps.

Select options
Mud Flaps for Dodge Front

STYLE# DF14 10
NO Stainless Steel Weights
Price $110 pair

STYLE# DF14 10 SS
With Stainless Steel Weights
Price $155 pair

Shipping - Within the 48 Continental USA $26, Alaska/Hawaii is $50, Canada is $50-$75. All others please call.

Dodge 2010-2013 Front 14″ Wide Standard Drill-less Mudflap – Style# DF14 10

This is a Drill-Less Mudflap, approximately 14 inches wide by 3/8 inch thick. Designed to hang approximately 8 inches below the fender well on a 4WD and hang approximately 7 inches below the fender well on a 2WD.

Application: FRONT of all  Single Rear Wheel size Dodge 2010 thru 2013 AND all Dual Rear Wheel Dodge 2010-2012 pickups with wider tires.

Mounting: Duraflap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck. Instructions included.

Serviceability: Mudflap is pre-drilled and requires no drilling of additional holes in your truck. Allows for easy & precise alignment, and drill-less installation. This mudflap is cut to go around the hump in your wheel well, allowing for easy positioning. If you have aftermarket flares on your truck, and the protective cap inside the lower center of the front fender well is removed, let us know on the questionnaire under comments so we can send you the correct fitting mud flaps. If you have aftermarket flares on your truck, and the protective cap inside the lower center of the front fender well is removed, let us know on the questionnaire under comments so we can send you the correct fitting mud flaps.

Select options
Mud Flaps for Dodge Front

STYLE# DF14L 10
NO Stainless Steel Weights
Price $115 pair

STYLE# DF14L 10 SS
With Stainless Steel Weights
Price $160 pair

Shipping - Within the 48 Continental USA $26, Alaska/Hawaii is $50, Canada is $50-$75. All others please call.

Dodge 2010-2013 Front 14″ Wide Extra Long Drill-less Mudflap – Style# DF14L 10

This is a Drill-Less Mudflap, approximately 14 inches wide by 3/8 inch thick. Designed to hang approximately 10 inches below the fender well on a 4WD.

Application: FRONT of all  Single Rear Wheel size Dodge 2010 thru 2013 AND all Dual Rear Wheel Dodge 2010-2012 pickups with over sized tires that have been lifted or leveled and require extra length.

Mounting: Duraflap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck. Instructions included.

Serviceability: Mudflap is pre-drilled and requires no drilling of additional holes in your truck. Allows for easy & precise alignment, and drill-less installation. This mudflap is cut to go around the hump in your wheel well, allowing for easy positioning. If you have aftermarket flares on your truck, and the protective cap inside the lower center of the front fender well is removed, let us know on the questionnaire under comments so we can send you the correct fitting mud flaps. If you have aftermarket flares on your truck, and the protective cap inside the lower center of the front fender well is removed, let us know on the questionnaire under comments so we can send you the correct fitting mud flaps.

Select options
Mud Flaps for Dodge Front

STYLE# DF12 13/14
NO Stainless Steel Weights
Price $100 pair

STYLE# DF12 13/14 SS
With Stainless Steel Weights
Price $140 pair

Shipping - Within the 48 Continental USA $26, Alaska/Hawaii is $50, Canada is $50-$75. All others please call.

Dodge Mud Flaps 2014-Current Front 12″ Wide Standard Drill-less-Style# DF12 13/14

These Dodge Mud Flaps are a Drill-Less Mudflap, approximately 12 inches wide by 3/8 inch thick. Designed to hang approximately 8 inches below the fender well on a 4WD and hang approximately 7 inches below the fender well on a 2WD.

Application: FRONT of all full-size Dodge 2013 thru current single rear wheel Dodge full-size pickups and 2013 thru current Dodge dually pickups.

Mounting: DuraFlap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck. Instructions included.

Serviceability: Mudflap is pre-drilled and requires no drilling of additional holes in your truck. Allows for easy & precise alignment, and drill-less installation. This mudflap is cut to go around the hump in your wheel well, allowing for easy positioning. If you have aftermarket flares on your truck, and the protective cap inside the lower center of the front fender well is removed, let us know on the questionnaire under comments so we can send you the correct fitting mud flaps.

Select options
Mud Flaps for Dodge Front

STYLE# DF12L 13/14
NO Stainless Steel Weights
Price $105 pair

STYLE# DF12L 13/14 SS
With Stainless Steel Weights
Price $145 pair

Shipping - Within the 48 Continental USA $26, Alaska/Hawaii is $50, Canada is $50-$75. All others please call.

Dodge Mud Flap 2014-Current Front 12″ Wide Extra Long Drill-less-Style# DF12L 13/14

This Dodge Mud Flap is a Drill-Less Mudflap, approximately 12 inches wide by 3/8 inch thick. Designed to hang approximately 10 inches below the fender well.

Application: FRONT of all full-size Dodge 2013 thru current single rear wheel Dodge full-size pickups and 2013 thru current Dodge dually pickups that have been lifted or leveled and require extra length.

Mounting: DuraFlap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck. Instructions included.

Serviceability: Mudflap is pre-drilled and requires no drilling of additional holes in your truck. Allows for easy & precise alignment, and drill-less installation. This mudflap is cut to go around the hump in your wheel well, allowing for easy positioning. If you have aftermarket flares on your truck, and the protective cap inside the lower center of the front fender well is removed, let us know on the questionnaire under comments so we can send you the correct fitting mud flaps.

Select options
Mud Flaps for Dodge Front

STYLE# DF14 13/14
NO Stainless Steel Weights
Price $110 pair

STYLE# DF14 13/14 SS
With Stainless Steel Weights
Price $155 pair

Shipping - Within the 48 Continental USA $26, Alaska/Hawaii is $50, Canada is $50-$75. All others please call.

Dodge 2013-current Front 14″ Wide Standard Drill-less Mudflap – Style# DF14 13/14

This is a Drill-Less Mudflap, approximately 14 inches wide by 3/8 inch thick. Designed to hang approximately 10 inches below the fender well on a 4WD and hang approximately 7 inches below the fender well on a 2WD.

Application: FRONT of all full-size Dodge 2013 thru current single rear wheel Dodge full size pickups and 2013 thru current Dodge dually pickups with wider tires.

Mounting: DuraFlap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck. Instructions included.

Serviceability: Mudflap is pre-drilled and requires no drilling of additional holes in your truck. Allows for easy & precise alignment, and drill-less installation. This mudflap is cut to go around the hump in your wheel well, allowing for easy positioning. If you have aftermarket flares on your truck, and the protective cap inside the lower center of the front fender well is removed, let us know on the questionnaire under comments so we can send you the correct fitting mud flaps. If you have aftermarket flares on your truck, and the protective cap inside the lower center of the front fender well is removed, let us know on the questionnaire under comments so we can send you the correct fitting mud flaps.

Select options
Mud Flaps for Dodge Front

STYLE# DF14L 13/14
NO Stainless Steel Weights
Price $115 pair

STYLE# DF14L 13/14 SS
With Stainless Steel Weights
Price $160 pair

Shipping - Within the 48 Continental USA $26, Alaska/Hawaii is $50, Canada is $50-$75. All others please call.

Dodge 2013-Current Front 14″ Wide Extra Long Drill-less Mudflap – Style# DF14L 13/14

This is a Drill-Less Mudflap, approximately 14 inches wide by 3/8 inch thick. Designed to hang approximately 12 inches below the fender well on a 4WD.

Application: FRONT of all full-size Dodge 2013 thru current single rear wheel Dodge full size pickups and 2013 thru current Dodge dually pickups that have been lifted or leveled and require extra length and extra width.

Mounting: Duraflap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck. Instructions included.

Serviceability: Mudflap is pre-drilled and requires no drilling of additional holes in your truck. Allows for easy & precise alignment, and drill-less installation. This mudflap is cut to go around the hump in your wheel well, allowing for easy positioning. If you have aftermarket flares on your truck, and the protective cap inside the lower center of the front fender well is removed, let us know on the questionnaire under comments so we can send you the correct fitting mud flaps. If you have aftermarket flares on your truck, and the protective cap inside the lower center of the front fender well is removed, let us know on the questionnaire under comments so we can send you the correct fitting mud flaps

Select options
mud flap for Dodge Dually

STYLE# DR20L 10
NO Stainless Steel Weights
Price $120 pair

STYLE# DR20L 10 SS
With Stainless Steel Weights
Price $170 pair

Shipping - Within the 48 Continental USA $26, Alaska/Hawaii is $50, Canada is $50-$75. All others please call.

Dodge Dually Mud Flap 2010-current Rear 20″ Wide 4×4 Extra Long Drill-less – Style# DR20L 10

This Dodge Dually Mud flap is approximately 20 inches wide by 3/8 inch thick; and designed to hang approximately 15 inches below the fender well.

Application: REAR of all 4WD Dually trucks 2010 thru Current.

Mounting: Duraflap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. This pre-drilled mudflap requires no drilling through any metal, but does require one hole to be drilled thru the plastic liner for a snug fit.

Serviceability: This Mudflap is Pre-drilled and requires no drilling of additional holes in your truck metal. Allows for easy & precise alignment.

 

Select options
WPChat