Dodge Mud Flaps

Custom Dodge Mud Flaps are made from the finest quality materials available, and they will not to tear, peel, fade, rust or break. DuraFlap uses an anti-sail design on the no drill and standard installation mud guards.  As a result, this exclusive design prevents the mud flap from flying up behind the truck.  This gives your truck and vehicles around you increased protection from rock chips, and prevents broken windows.  DuraFlap uses quality designed “Rain Grooves” on the tire side of the mud flaps.   Damaging rain, snow & road debris are directed down and away from the vehicle. Flat surface styles allow liquids to work their way around the sides to continue back, and damage your vehicle.

Full size mud flaps give your vehicle more complete coverage than splash guards are not able to match. Therefore providing more protection and saving you money on future paint jobs.

Custom designs are available for modified trucks with lifts, aftermarket flares and over-sized wheels or tires ONLY by DuraFlap.

Customers can buy drill-less installation mud flaps with or without our 304 Mirror Finished Stainless Steel weights.  Both styles use the same high quality materials and provide great protection. Our stainless steel will not rust.  We also create our own custom artwork for these Dodge mud flaps.
 DODGE MUD FLAPS
Models include Ram 1500, Ram 2500, Ram 3500, Ram 4500, Duallys, and splash guards for other models.

Ford Mud Flap

STYLE 10
NO Stainless Steel Weights
Price $50 pair

STYLE 10 SS
With Stainless Steel Weights
Price $80 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Universal Front & Rear 10″ Wide Standard Drill-less Mudflap – Style# 10

This is approximately 10 inches wide by 17 inches long by 3/8 inch thick.

Application: FRONT AND REAR of smaller trucks, SUV’s and Vans.

Mounting: Included Stainless Steel self-tapping screws.

Serviceability: Easy installation makes this a popular choice, great for dressing up your vehicle.

 

To Order

STYLE# F10
NO Stainless Steel Weights
Price $50 pair

STYLE# F10 SS
With Stainless Steel Weights
Price $80 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Universal Front 10″ Wide Universal Mudflap Requires Drilling – Style# F10

This is approximately 10 inches wide by 18 inches tall by 3/8 inch thick.

Application: FRONT of all 1982 thru Current small Pickups, SUV’s and Vans.

Mounting: Included Stainless Steel self tapping screws.

Serviceability: Its’ ease of installation makes this a popular choice for the smaller trucks, vans or SUVs.

This 10″ wide mudflap will fit the front of all 1982 thru Current small Pickups, SUV’s and Vans.

To Order

STYLE# R10
NO Stainless Steel Weights
Price $50 pair

STYLE# R10 SS
With Stainless Steel Weights
Price $80 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Universal Rear 10″ Wide Universal Mudflap Requires Drillling – Style# R10

This is approximately 10 inches wide by 21 inches tall by 3/8 inch thick.

Application: REAR of all 1982 thru Current smaller Pickups, SUV’s and Vans.

Mounting: Included Stainless Steel self tapping screws.

Serviceability: Its’ ease of installation makes this a popular choice for the smaller trucks, vans or SUVs.

To Order

STYLE# DF12 02
NO Stainless Steel Weights
Price $75 pair

STYLE# DF12 02 SS
With Stainless Steel Weights
Price $105 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Dodge 1994-2002 Front 12″ Wide Mudflap Requires Drilling – Style# DF12 02

This Mudflap is approximately 12 inches wide by 22 inches long by 3/8 inch thick.

Application: FRONT of all full size Dodge 1994 thru 2002 2500/3500 pickups with stock wheels and tires.

Mounting: Comes with 8 self tapping Stainless Steel screws and washers for mounting.

Serviceability: Mudflap is shaped specifically to fit inside the front fenderwell of the 1994-2002 Dodge. Allows for easy & precise alignment.

 

To Order
Ford Explorer Mud Flap

STYLE# DF12
NO Stainless Steel Weights
Price $90 pair

STYLE# DF12 SS
With Stainless Steel Weights
Price $120 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Dodge 2003-2009 Front 12″ Wide Standard Drill-less Mudflap – Style# Style# DF12

This is a Drill-Less Mudflap, approximately 12 inches wide by 3/8 inch thick. Designed to hang approximately 10 inches below the fender well.

Application: FRONT of all full-size Dodge 2003 thru 2009 current pickups. If your truck is a Power Wagon, we do have a drill-less mudflap to fit. Just let us know on the questionnaire & we will send you the correct mudflap.

Mounting: Duraflap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck. Instructions included.

Serviceability: Mudflap is pre-drilled and requires no drilling of additional holes in your truck. Allows for easy & precise alignment, and drill-less installation.

To Order
Ford Explorer Mud Flap

STYLE# DF12L
NO Stainless Steel Weights
Price $95 pair

STYLE# DF12L SS
With Stainless Steel Weights
Price $125 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Dodge 2003-2009 Front 12″ Wide Extra Long Drill-less Mudflap – DF12L

This is a Drill-Less Mudflap, approximately 12 inches wide by 3/8 inch thick. Designed to hang approximately 12 inches below the fender well.

Application: FRONT of all full-size Dodge 2003 to 2009 pickups, that have a leveling kit or lift. If your truck is a Power Wagon, we do have a drill-less mudflap to fit, butt let us know on the order form & we will send you the correct mudflap.

Mounting: Duraflap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck. Instructions included.

Serviceability: This front mudflap is extra long for those that have added a leveling kit, lifted their truck or just want additional protection further back on the truck body. Mudflap is pre-drilled and requires no drilling of additional holes in your truck. Allows for easy & precise alignment, and drill-less installation.

To Order
Ford Mud Flaps 2017 rear

STYLE# DR20L
NO Stainless Steel Weights
Price $105 pair

STYLE# DR20L SS
With Stainless Steel Weights
Price $155 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Dodge 2003-2009 Rear 20″ Wide 4X4 Drill-less Mudflaps – Style# DR20L

This is approximately 20 inches wide by 3/8 inch thick; and designed to hang approximately 14 inches below fenderwell.

Application: REAR of all 4WD Dually trucks 2003 thru 2009. If your Dodge is a Mega Cab please note this in the comment box on order form. That will require a slightly different shaped mud flap for the rear.

Mounting: Duraflap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck. Instructions included.

Serviceability: This Mudflap is pre-drilled and requires no drilling of additional holes in your truck metal. Allows for easy & precise alignment.

 

To Order
Ford Mud Flaps 2017 rear

STYLE# DR20L Mega
NO Stainless Steel Weights
Price $105 pair

STYLE# DR20L Mega SS
With Stainless Steel Weights
Price $155 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Dodge 2003-2009 Rear 20″ Wide 4X4 Extra Long Drill-less Mudflap for Mega Cab – Style# DR20L Mega

This is approximately 20 inches wide by 3/8 inch thick and designed to hang approximately 15 inches below fenderwell.

Application: REAR of all 4WD Dually MEGA CAB trucks 2003 thru 2009.

Mounting: Duraflap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck. Instructions included.

Serviceability: This Mudflap is pre-drilled and requires no drilling of additional holes in your truck metal. Allows for easy & precise alignment.

 

To Order
Ford Mud Flaps 2017 rear

STYLE# DR20
NO Stainless Steel Weights
Price $105 pair

STYLE# DR20 SS
With Stainless Steel Weights
Price $155 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Dually 2003-2009 Rear 20″ Wide 2WD Drill-less Mudflaps – Style# DR20

This is approximately 20 inches wide by 3/8 inch thick; and designed to hang approximately 12 inches below fenderwell.

Application: REAR of all 2WD Dually trucks 2003 thru 2009. If your Dodge is a Mega Cab please note this in the comment box on order form. That will require a slightly different shaped mud flap for the rear.

Mounting: Duraflap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck. Instructions included.

Serviceability: This Mudflap is pre-drilled and requires no drilling of additional holes in your truck metal. Allows for easy & precise alignment.

 

To Order
Ford Mud Flaps 2017 rear

STYLE# DR20 Mega

NO Stainless Steel Weights
Price $105 pair

STYLE# DR20 Mega SS
With Stainless Steel Weights
Price $155 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Dodge Dually Rear 20″ Wide 4WD Drill-less Mega Cab Mudflap – Style# DR20 Mega

This is approximately 20 inches wide by 3/8 inch thick; and designed to hang approximately 12 inches below fenderwell.

Application: REAR of all 2WD Dually MEGA CAB trucks 2003 thru 2009.

Mounting: Duraflap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck. Instructions included.

Serviceability: This Mudflap is pre-drilled and requires no drilling of additional holes in your truck metal. Allows for easy & precise alignment.

 

To Order
Ford Explorer Mud Flap

STYLE# DF14
NO Stainless Steel Weights
Price $95 pair

STYLE# DF14 SS
With Stainless Steel Weights
Price $135 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Dodge 2003-2009 Front 14″ Wide Standard Drill-less Mudflap – Style# DF14

This is a Drill-Less Mudflap, approximately 14 inches wide by 3/8 inch thick. Designed to hang approximately 10 inches below the fender well.

Application: FRONT of all full-size Dodge 2003 thru 2009 pickups with wider tires. If your truck is a Power Wagon, we do have a drill-less mudflap to fit, but let us know on the order form & we will send you the correct mudflap

Mounting: Duraflap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck. Instructions included.

Serviceability: Mudflap is pre-drilled and requires no drilling of additional holes in your truck. Allows for easy & precise alignment, and drill-less installation.

To Order
Ford Explorer Mud Flap

STYLE# DF14L
NO Stainless Steel Weights
Price $100 pair

STYLE# DF14L SS
With Stainless Steel Weights
Price $140 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Dodge 2003-2009 Front 14″ Wide Extra Long Drill-less Mudflap – Style# DF14L

This is a Drill-Less Mudflap, approximately 14 inches wide by 3/8 inch thick. Designed to hang approximately 12 inches below the fender well.

Application: FRONT of all full-size Dodge 2003 to 2009 pickups with a leveling kit or lift and extra wide tires. If your truck is a Power Wagon, we do have a drill-less mudflap to fit, but let us know on the order form & we will send you the correct mudflap.

Mounting: Duraflap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck. Instructions included.

Serviceability: This front mudflap is extra long for those that have added a leveling kit, lifted their truck or just want additional protection further back on the truck body. Mudflap is pre-drilled and requires no drilling of additional holes in your truck. Allows for easy & precise alignment, and drill-less installation.

To Order
Mud flap for Dodge 4500

STYLE# DF12 19 4500
NO Stainless Steel Weights
Price $110 pair

STYLE# DF12 19 4500 SS

With Stainless Steel Weights
Price $140 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Mud Flap for Dodge 4500 Front 2019-current 12″ Wide Drill-less- Style# DF12 19 4500

This DF2 19 4500 is a Drill-Less Mudflap, approximately 12 inches wide by 3/8 inch thick, designed to hang approximately 10 inches below the fender well.

Application: FRONT of all Dodge 4500/5500 2019 thru Current pickups.

Mounting: DuraFlap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck. Instructions included.

Serviceability: Mudflap is pre-drilled and requires no drilling of additional holes in your truck. Allows for easy & precise alignment, and drill-less installation. This mudflap is cut to go around the fender well flares, allowing for easy positioning.

 

To Order
Mud flap for Dodge 4500

STYLE# DF12L 19 4500
NO Stainless Steel Weights
Price $115 pair

STYLE# DF12L 19 4500 SS
With Stainless Steel Weights
Price $145 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Dodge 4500 Mud Flaps Front 2019-current 12″ Wide Extra Long Drill-less – Style# DF12L 19 4500

These Dodge 4500 Mud flaps are a no drill design, approximately 12 inches wide by 3/8 inch thick, designed to hang approximately 12 inches below the fender well.

Application: FRONT of all Dodge 4500/5500 2019-current pickups.

Mounting: DuraFlap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck. Instructions included.

Serviceability: Mudflap is pre-drilled and requires no drilling of additional holes in your truck. Allows for easy & precise alignment, and drill-less installation. This mudflap is cut to go around the fender well flares, allowing for easy positioning.

 

To Order
Mud flap for Dodge 4500

STYLE# DF14L 19 4500
NO Stainless Steel Weights
Price $120 pair

STYLE# DF14L 19 4500 SS
With Stainless Steel Weights
Price $160 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Dodge 4500 Mud Flap Front 2019-current 14″ Wide Extra Long Drill-less – Style DF14L 19 4500

This Dodge 4500 Mud Flap is a Drill-Less Mudflap, approximately 14 inches wide by 3/8 inch thick, designed to hang approximately 12 inches below the fender well.

Application: FRONT of all Dodge 4500/5500 2019-current pickups wanting the maximum protection for the side of their truck, and the back fenders.

Mounting: DuraFlap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck. Instructions included.

Serviceability: Mudflap is pre-drilled and requires no drilling of additional holes in your truck. Allows for easy & precise alignment, and drill-less installation. This mudflap is cut to go around the fender well flares, allowing for easy positioning.

 

To Order
Mud flap for Dodge 4500

STYLE# DF14 19 4500
NO Stainless Steel Weights
Price $115 pair

STYLE# DF14 19 4500 SS
With Stainless Steel Weights
Price $155 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Dodge 4500 Mud Flap for Front 2019-current 14″ Wide Drill-less – Style# DF14 19 4500

This Dodge 4500 Mud Flap is a drill-less installation, approximately 14 inches wide by 3/8 inch thick, designed to hang approximately 10 inches below the fender well.

Application: FRONT of Dodge 4500/5500 2019 thru Current pickups, desiring optimum coverage.

Mounting: DuraFlap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available o n your truck. Instructions included.

Serviceability: Mudflap is pre-drilled and requires no drilling of additional holes in your truck. Allows for easy & precise alignment, and drill-less installation. This mudflap is cut to go around the fender well flares, allowing for easy positioning.

 

To Order
Mud flap for Dodge 4500

STYLE# DF12L 10 4500
NO Stainless Steel Weights
Price $105 pair

STYLE# DF12L 10 4500 SS
With Stainless Steel Weights
Price $135 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Dodge 4500 Mud Flaps Front 2010-2018 12″ Wide Extra Long Drill-less – Style# DF12L 10 4500

These Dodge 4500 Mud flaps are a no drill design, approximately 12 inches wide by 3/8 inch thick, designed to hang approximately 12 inches below the fender well.

Application: FRONT of all Dodge 4500/5500 2010 thru 2018 pickups.

Mounting: DuraFlap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck. Instructions included.

Serviceability: Mudflap is pre-drilled and requires no drilling of additional holes in your truck. Allows for easy & precise alignment, and drill-less installation. This mudflap is cut to go around the fender well flares, allowing for easy positioning.

 

To Order
Mud flap for Dodge 4500

STYLE# DF12 10 4500
NO Stainless Steel Weights
Price $100 pair

STYLE# DF12 10 4500 SS
With Stainless Steel Weights
Price $130 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Mud Flap for Dodge 4500 Front 12″ Wide Drill-less- Style# DF12 10 4500

This DF2 10 4500 is a Drill-Less Mudflap, approximately 12 inches wide by 3/8 inch thick, designed to hang approximately 10 inches below the fender well.

Application: FRONT of all Dodge 4500/5500 2010 thru Current pickups.

Mounting: DuraFlap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck. Instructions included.

Serviceability: Mudflap is pre-drilled and requires no drilling of additional holes in your truck. Allows for easy & precise alignment, and drill-less installation. This mudflap is cut to go around the fender well flares, allowing for easy positioning.

 

To Order
Mud flap for Dodge 4500

STYLE# DF14L 10 4500
NO Stainless Steel Weights
Price $110 pair

STYLE# DF14L 10 4500 SS
With Stainless Steel Weights
Price $140 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Dodge 4500 Mud Flap Front 14″ Wide Extra Long Drill-less – Style DF14L 10 4500

This Dodge 4500 Mud Flap is a Drill-Less Mudflap, approximately 14 inches wide by 3/8 inch thick, designed to hang approximately 12 inches below the fender well.

Application: FRONT of all Dodge 4500/5500 2010 thru 2018 pickups wanting the maximum protection for the side of their truck, and the back fenders.

Mounting: DuraFlap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck. Instructions included.

Serviceability: Mudflap is pre-drilled and requires no drilling of additional holes in your truck. Allows for easy & precise alignment, and drill-less installation. This mudflap is cut to go around the fender well flares, allowing for easy positioning.

 

To Order
Mud flap for Dodge 4500

STYLE# DF14 10 4500
NO Stainless Steel Weights
Price $105 pair

STYLE# DF14 10 4500 SS
With Stainless Steel Weights
Price $145 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Mud Flap for Dodge 4500 Front 2010-2018 14″ Wide Drill-less – Style# DF14 10 4500

This Mudflap for a Dodge 4500 is a drill-less installation, approximately 14 inches wide by 3/8 inch thick, designed to hang approximately 10 inches below the fender well.

Application: FRONT of Dodge 4500/5500 2010 thru Current pickups, desiring optimum coverage.

Mounting: DuraFlap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available o n your truck. Instructions included.

Serviceability: Mudflap is pre-drilled and requires no drilling of additional holes in your truck. Allows for easy & precise alignment, and drill-less installation. This mudflap is cut to go around the fender well flares, allowing for easy positioning.

 

To Order
Mud Flaps for Dodge Front

STYLE# DF12 10
NO Stainless Steel Weights
Price $90 pair

STYLE# DF12 10 SS
With Stainless Steel Weights
Price $120 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Dodge 2010-2013 Front 12″ Wide Standard Drill-less Mudflap – Style# DF12 10

This is a Drill-Less Mudflap, approximately 12 inches wide by 3/8 inch thick. Designed to hang approximately 8 inches below the fender well on a 4WD and hang approximately 7 inches below the fender well on a 2WD.

Application: FRONT of all  Single Rear Wheel size Dodge 2010 thru 2013 AND all Dual Rear Wheel Dodge 2010-2012 pickups.

Mounting: Duraflap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck. Instructions included.

Serviceability: Mudflap is pre-drilled and requires no drilling of additional holes in your truck. Allows for easy & precise alignment, and drill-less installation. This mudflap is cut to go around the hump in your wheel well, allowing for easy positioning. If you have aftermarket flares on your truck, and the protective cap inside the lower center of the front fender well is removed, let us know on the questionnaire under comments so we can send you the correct fitting mud flaps. If you have aftermarket flares on your truck, and the protective cap inside the lower center of the front fender well is removed, let us know on the questionnaire under comments so we can send you the correct fitting mud flaps.

To Order
Mud Flaps for Dodge Front

STYLE# DF12L 10 
NO Stainless Steel Weights
Price $95 pair

STYLE# DF12L 10 SS
With Stainless Steel Weights
Price $125 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Dodge 2010-2013 Front 12″ Wide Extra Long Drill-less Mudflap – Style# DF12L 10

This is a Drill-Less Mudflap, approximately 12 inches wide by 3/8 inch thick. Designed to hang approximately 10 inches below the fender well on a 4WD.

Application: FRONT of all  Single Rear Wheel size Dodge 2010 thru 2013 AND all Dual Rear Wheel Dodge 2010-2012 pickups.

Mounting: Duraflap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck. Instructions included.

Serviceability: Mudflap is pre-drilled and requires no drilling of additional holes in your truck. Allows for easy & precise alignment, and drill-less installation. This mudflap is cut to go around the hump in your wheel well, allowing for easy positioning. If you have aftermarket flares on your truck, and the protective cap inside the lower center of the front fender well is removed, let us know on the questionnaire under comments so we can send you the correct fitting mud flaps. If you have aftermarket flares on your truck, and the protective cap inside the lower center of the front fender well is removed, let us know on the questionnaire under comments so we can send you the correct fitting mud flaps.

To Order
Mud Flaps for Dodge Front

STYLE# DF14 10
NO Stainless Steel Weights
Price $95 pair

STYLE# DF14 10 SS
With Stainless Steel Weights
Price $135 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Dodge 2010-2013 Front 14″ Wide Standard Drill-less Mudflap – Style# DF14 10

This is a Drill-Less Mudflap, approximately 14 inches wide by 3/8 inch thick. Designed to hang approximately 8 inches below the fender well on a 4WD and hang approximately 7 inches below the fender well on a 2WD.

Application: FRONT of all  Single Rear Wheel size Dodge 2010 thru 2013 AND all Dual Rear Wheel Dodge 2010-2012 pickups with wider tires.

Mounting: Duraflap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck. Instructions included.

Serviceability: Mudflap is pre-drilled and requires no drilling of additional holes in your truck. Allows for easy & precise alignment, and drill-less installation. This mudflap is cut to go around the hump in your wheel well, allowing for easy positioning. If you have aftermarket flares on your truck, and the protective cap inside the lower center of the front fender well is removed, let us know on the questionnaire under comments so we can send you the correct fitting mud flaps. If you have aftermarket flares on your truck, and the protective cap inside the lower center of the front fender well is removed, let us know on the questionnaire under comments so we can send you the correct fitting mud flaps.

To Order
Mud Flaps for Dodge Front

STYLE# DF14L 10
NO Stainless Steel Weights
Price $100 pair

STYLE# DF14L 10 SS
With Stainless Steel Weights
Price $140 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Dodge 2010-2013 Front 14″ Wide Extra Long Drill-less Mudflap – Style# DF14L 10

This is a Drill-Less Mudflap, approximately 14 inches wide by 3/8 inch thick. Designed to hang approximately 10 inches below the fender well on a 4WD.

Application: FRONT of all  Single Rear Wheel size Dodge 2010 thru 2013 AND all Dual Rear Wheel Dodge 2010-2012 pickups with over sized tires that have been lifted or leveled and require extra length.

Mounting: Duraflap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck. Instructions included.

Serviceability: Mudflap is pre-drilled and requires no drilling of additional holes in your truck. Allows for easy & precise alignment, and drill-less installation. This mudflap is cut to go around the hump in your wheel well, allowing for easy positioning. If you have aftermarket flares on your truck, and the protective cap inside the lower center of the front fender well is removed, let us know on the questionnaire under comments so we can send you the correct fitting mud flaps. If you have aftermarket flares on your truck, and the protective cap inside the lower center of the front fender well is removed, let us know on the questionnaire under comments so we can send you the correct fitting mud flaps.

To Order
Mud Flaps for Dodge Front

STYLE# DF12 13/14
NO Stainless Steel Weights
Price $90 pair

STYLE# DF12 13/14 SS
With Stainless Steel Weights
Price $120 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Dodge 2014-Current Front 12″ Wide Standard Drill-less Mudflap – Style# DF12 13/14

This is a Drill-Less Mudflap, approximately 12 inches wide by 3/8 inch thick. Designed to hang approximately 8 inches below the fender well on a 4WD and hang approximately 7 inches below the fender well on a 2WD.

Application: FRONT of all full-size Dodge 2013 thru current single rear wheel Dodge full-size pickups and 2013 thru current Dodge dually pickups.

Mounting: DuraFlap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck. Instructions included.

Serviceability: Mudflap is pre-drilled and requires no drilling of additional holes in your truck. Allows for easy & precise alignment, and drill-less installation. This mudflap is cut to go around the hump in your wheel well, allowing for easy positioning. If you have aftermarket flares on your truck, and the protective cap inside the lower center of the front fender well is removed, let us know on the questionnaire under comments so we can send you the correct fitting mud flaps. If you have aftermarket flares on your truck, and the protective cap inside the lower center of the front fender well is removed, let us know on the questionnaire under comments so we can send you the correct fitting mud flaps.

To Order
Mud Flaps for Dodge Front

STYLE# DF12L 13/14
NO Stainless Steel Weights
Price $95 pair

STYLE# DF12L 13/14 SS
With Stainless Steel Weights
Price $125 pair

Shipping within the 48 Continental USA $22, Alaska/Hawaii is $50, Canada is $60-75. All others please call.

Dodge 2014-Current Front 12″ Wide Extra Long Drill-less Mudflap – Style# DF12L 13/14

This is a Drill-Less Mudflap, approximately 12 inches wide by 3/8 inch thick. Designed to hang approximately 10 inches below the fender well.

Application: FRONT of all full-size Dodge 2013 thru current single rear wheel Dodge full-size pickups and 2013 thru current Dodge dually pickups that have been lifted or leveled and require extra length.

Mounting: DuraFlap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck. Instructions included.

Serviceability: Mudflap is pre-drilled and requires no drilling of additional holes in your truck. Allows for easy & precise alignment, and drill-less installation. This mudflap is cut to go around the hump in your wheel well, allowing for easy positioning. If you have aftermarket flares on your truck, and the protective cap inside the lower center of the front fender well is removed, let us know on the questionnaire under comments so we can send you the correct fitting mud flaps. If you have aftermarket flares on your truck, and the protective cap inside the lower center of the front fender well is removed, let us know on the questionnaire under comments so we can send you the correct fitting mud flaps.

To Order
WPChat