Chevy Mud Flaps

Custom Drill-less and Standard Mudflaps

DuraFlap Chevy mud flaps are custom made from the finest quality materials available. They are designed not to tear, peel, fade, rust or break. Our no drill and our standard installation mud guards have an anti-sail design that prevents the mud flap from flying up behind the truck, giving your truck and vehicles around you, increased protection from rock chips.

These Chevy truck mud flaps are made with our exclusive “Rain Grooves”  and direct rain, snow & road debris down and away from the vehicle. Flat surfaces allow liquids to work their way around the sides to continue to damage your vehicle.

Only our full size mud flaps give your vehicle a more complete coverage that splash guards are not able to match. Custom designs are available for modified trucks with lifts, aftermarket flares and over-sized wheels or tires.

Our patented drill-less installation mud flaps are available with or without our 304 Mirror Finished Stainless Steel weights.  Both styles use the same high quality materials and provide great protection. We also create our own custom artwork for these Chevy mud flaps.

Chevy Mud Flaps

Models include 1500, 2500, 3500, 4500, Duallys, vans, and mud flaps for other models.

GMC with small spalshguard and DuraFlap Mud flaps

STYLE# CR12 20
NO Stainless Steel Weights
Price $115 pair

STYLE# CR12 20 SS
With Stainless Steel Weights
Price $155 pair

Shipping - Within the 48 Continental USA $26, Alaska/Hawaii is $50, Canada is $50-$75. All others please call.

MudFlap for Chevy 2020 – Current Rear 12″ Wide Drill-less – Style CR12 20

This MudFlap for Chevy 2020 is approximately 14 inches wide by 3/8 inch thick, designed to hang approximately 13 inches below the fender well.

Fits the REAR of the 2020 – current Chevy  2500/3500 trucks with the factory trim guard in place.  This will work only with the narrow splashguard.  If you have the wider splashguard you need to review our CR14 20 mud flap.

Made of stainless steel where available the mounting hardware will not rust. Other mounting products are made of anti-corrosive and rust resistant materials. Custom designed to utilize existing factory holes and other mounting points available on your truck. Instructions included.

No drilling of additional holes in your truck makes for a drill-less installation. Allows for easy & precise alignment, and drill-less installations.  These mud flaps will be installed in front of the factory trim guards.  The trim guards need to stay in place to avoid the gap in the lower panel behind the fender well.

 

Select options
2020 Chevy/GMC rear mud flap

STYLE# CR14L 20
NO Stainless Steel Weights
Price $120 pair

STYLE# CR14L 20 SS
With Stainless Steel Weights
Price $165 pair

Shipping - Within the 48 Continental USA $26, Alaska/Hawaii is $50, Canada is $50-$75. All others please call.

Mud Flap for Chevy 2020-Current Rear 14″ Wide Extra Long Drill-less – Style CR14L 20

This Mud Flap for Chevy 2020 is approximately 14 inches wide by 3/8 inch thick, designed to hang approximately 15 inches below the fender well.

Fits the REAR of the 2020 – current Chevy  2500/3500 trucks with the factory trim guard in place.  A great fit for trucks with a slight lift or level kit, or the dual rear wheel truck needing more protection for the rear fender wells.  This will work with either the wider splashguard or the narrow splashguard.  If you have the narrow splashguard you will also want to review our CR12L 20 mud flap.

Made of stainless steel where available the mounting hardware will not rust. Other mounting products are made of anti-corrosive and rust resistant materials. Custom designed to utilize existing factory holes and other mounting points available on your truck. Instructions included.

No drilling of additional holes in your truck makes for a drill-less installation. Allows for easy & precise alignment, and drill-less installations.  These mud flaps will be installed in front of the factory trim guards.  The trim guards need to stay in place to avoid the gap in the lower panel behind the fender well.

 

Select options
GMC with small spalshguard and DuraFlap Mud flaps

STYLE# CR12L 20
NO Stainless Steel Weights
Price $120 pair

STYLE# CR12L 20 SS
With Stainless Steel Weights
Price $160 pair

Shipping - Within the 48 Continental USA $26, Alaska/Hawaii is $50, Canada is $50-$75. All others please call.

MudFlap for Chevy 2020-Current Rear 12″ Wide Extra Long Drill-less – Style CR12L 20

This MudFlap for Chevy 2020 is approximately 12 inches wide by 3/8 inch thick, designed to hang approximately 15 inches below the fender well.

Fits the REAR of the 2020 – current Chevy  2500/3500 trucks with the factory trim guard in place.  A great fit for trucks with a slight lift,  level kit, or those trying to protect a boat or trailer. This will work only with the narrow splashguard.  If you have the wider splashguard you need to review our CR14L 20 mud flap.

Made of stainless steel where available the mounting hardware will not rust. Other mounting products are made of anti-corrosive and rust resistant materials. Custom designed to utilize existing factory holes and other mounting points available on your truck. Instructions included.

No drilling of additional holes in your truck makes for a drill-less installation. Allows for easy & precise alignment, and drill-less installations.  These mud flaps will be installed in front of the factory trim guards.  The trim guards need to stay in place to avoid the gap in the lower panel behind the fender well.

 

Select options

STYLE# CF12 07 SUV TB
NO Stainless Steel Weights
Price $100 pair

STYLE# CF12 07 SUV TB SS
With Stainless Steel Weights
Price $140 pair

Shipping - Within the 48 Continental USA $26, Alaska/Hawaii is $50, Canada is $50-$75. All others please call.

Chevy 2007-2014 Front 12″ Wide Tuck Behind Drill-less Mudflaps – Style# CF12 07 SUV TB

This is approximately 12 inches wide by 3/8 inch thick, designed to hang approximately 8 inches below the fender well.

Application: FRONT of 2007 thru 2014 Tahoe with the taller wheels that require a little bit more clearance to keep the tires from rubbing on the mud flap when turning the wheel.  This mud flap does not fit the Hybrid models.

Mounting: DuraFlap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck. Instructions included.

Serviceability: Mudflap is pre-drilled and requires no drilling of additional holes in your truck. Allows for easy & precise alignment, and drill-less installations.

 

Select options

STYLE# CF 5 07 SUV
NO Stainless Steel Weights
Price $110 pair

STYLE# CF 5 07 SUV SS
With Stainless Steel Weights
Price $155 pair

Shipping - Within the 48 Continental USA $26, Alaska/Hawaii is $50, Canada is $50-$75. All others please call.

Chevy Mudflaps 2007-2014 Front 14″ Wide Tuck Behind Drill-less – Style# CF14 07 TB

This is approximately 14 inches wide by 3/8 inch thick, designed to hang approximately 8 inches below the fender well.

Application: FRONT of 2007 thru 2014 Tahoe with the taller wheels that require a little bit more clearance to keep the tires from rubbing on the mud flap when turning the wheel.  This mud flap does not fit the Hybrid models.

Mounting: DuraFlap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck. Instructions included.

Serviceability: Mudflap is pre-drilled and requires no drilling of additional holes in your truck. Allows for easy & precise alignment, and drill-less installations.

 

Select options
4

STYLE# CR12 07 SUV
NO Stainless Steel Weights
Price $105 pair

STYLE# CR12 07 SUV SS
With Stainless Steel Weights
Price $145 pair

Shipping - Within the 48 Continental USA $26, Alaska/Hawaii is $50, Canada is $50-$75. All others please call.

Chevy SUV Mud Flap 2007-2014 Rear 12″ Wide Standard Drill-less Mudflap – Style# CR12 07 SUV

This Chevy SUV Mud Flap is approximately 12 inches wide by 3/8 inch thick, designed to hang approximately 8 inches below the fender well.

Application: REAR of 2007 thru 2014 Tahoe, Suburban, Yukon, Avalanche and Escalade. This mud flap does not fit the Hybrid models.

Mounting: Duraflap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck.

Serviceability: Mudflap is pre-drilled and requires no drilling of additional holes in your truck. Allows for easy & precise alignment, and drill-less installations.

Select options

STYLE# F10
NO Stainless Steel Weights
Price $50 pair

STYLE# F10 SS
With Stainless Steel Weights
Price $80 pair

Shipping - Within the 48 Continental USA $26, Alaska/Hawaii is $50, Canada is $50-$75. All others please call.

Small Universal Mudflap Front 10″ Wide Requires Drilling – Style# F10

This small universal mudflap is approximately 10 inches wide by 18 inches tall by 3/8 inch thick.

Application: FRONT of all 1982 thru Current small Pickups, SUV’s and Vans.

Mounting: Included Stainless Steel self tapping screws.

Serviceability: Its’ ease of installation makes this a popular choice for the smaller trucks, vans or SUVs.

This 10″ wide mudflap will fit the front of all 1982 thru Current small Pickups, SUV’s and Vans.

Select options

STYLE# R10
NO Stainless Steel Weights
Price $50 pair

STYLE# R10 SS
With Stainless Steel Weights
Price $80 pair

Shipping - Within the 48 Continental USA $26, Alaska/Hawaii is $50, Canada is $50-$75. All others please call.

Small Universal Mud Flap Rear 10″ Wide Requires Drilling – Style# R10

This small universal mud flap is approximately 10 inches wide by 21 inches tall by 3/8 inch thick.

Application: REAR of all 1982 thru Current smaller Pickups, SUV’s and Vans.

Mounting: Included Stainless Steel self tapping screws.

Serviceability: Its’ ease of installation makes this a popular choice for the smaller trucks, vans or SUVs.

Select options

STYLE# CF12
NO Stainless Steel Weights
Price $100 pair

STYLE# CF12 SS
With Stainless Steel Weights
Price $140 pair

Shipping - Within the 48 Continental USA $26, Alaska/Hawaii is $50, Canada is $50-$75. All others please call.

Front 12″ Wide 2001-2007 Drill-less Mudflap – Style# CF12

This is a Drill-less Mudflap, approximately 12 inches wide by 3/8 inch thick, designed to hang approximately 9 inches below the fender well.

Application: FRONT of all 2001 thru 2007 full-size and 1500 classic style pickups including 4WD.

Mounting: Duraflap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck. Instructions included.

Serviceability: This Mudflap is pre-drilled and requires no drilling of additional holes in your truck. Allows for easy & precise alignment, and drill-less installation.

Select options
Ford Mud Flap

STYLE# CF12L
NO Stainless Steel Weights
Price $105 pair

STYLE# CF12L SS
With Stainless Steel Weights
Price $145 pair

Shipping - Within the 48 Continental USA $26, Alaska/Hawaii is $50, Canada is $50-$75. All others please call.

Chevy 2001-2007 Front 12″ Wide Extra Long Drill-less Mudflap – Style# CF12L

This is a Drill-less Mudflap, approximately 12 inches wide by 3/8 inch thick, designed to hang approximately 11 inches below the fender well.

Application: FRONT of all 2001 thru 2007 full-size classic style pickups requiring extra length due to leveling, lift or oversized tires.

NOTE: For OverSized Tires that may rub on front mudflap.

Mounting: Duraflap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck. Instructions included.

Serviceability: This Mudflap is pre-drilled and requires no drilling of additional holes in your truck. Allows for easy & precise alignment, and drill-less installation.

Select options
WPChat