Chevy Mud Flaps

Custom Drill-less and Standard Mudflaps

DuraFlap Chevy mud flaps are custom made from the finest quality materials available. They are designed not to tear, peel, fade, rust or break. Our no drill and our standard installation mud guards have an anti-sail design that prevents the mud flap from flying up behind the truck, giving your truck and vehicles around you, increased protection from rock chips.

These Chevy truck mud flaps are made with our exclusive “Rain Grooves”  and direct rain, snow & road debris down and away from the vehicle. Flat surfaces allow liquids to work their way around the sides to continue to damage your vehicle.

Only our full size mud flaps give your vehicle a more complete coverage that splash guards are not able to match. Custom designs are available for modified trucks with lifts, aftermarket flares and over-sized wheels or tires.

Our patented drill-less installation mud flaps are available with or without our 304 Mirror Finished Stainless Steel weights.  Both styles use the same high quality materials and provide great protection. We also create our own custom artwork for these Chevy mud flaps.

Chevy Mud Flaps

Models include 1500, 2500, 3500, 4500, Duallys, vans, and mud flaps for other models.

Refine Search

Ford Mud Flap

STYLE# CF 14L 07 
NO Stainless Steel Weights
Price $115 pair

STYLE# CF 14L 07  SS
With Stainless Steel Weights
Price $160 pair

Shipping - Within the 48 Continental USA $26, Alaska/Hawaii is $50, Canada is $50-$75. All others please call.

Chevy Mudflaps 2007-2014 Front 14″ Wide Extra Long Drill-less – Style# CF14L 07

This is a Drill-less Mudflap, approximately 14 inches wide by 3/8 inch thick, designed to hang approximately 11 inches below the fender well.

Application: FRONT of all 2007 thru 2014 full-size pickups requiring extra width and length due to leveling, lift or oversized tires.

NOTE: For OverSized Tires that may rub on front mudflap.

Mounting: DuraFlap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck. Instructions included.

Serviceability: This Mudflap is pre-drilled and requires no drilling of additional holes in your truck metal. Allows for easy & precise alignment, and drill-less installation.

Select options
Mud Flap for Colorado / Canyon

STYLE# CCF12 15
NO Stainless Steel Weights
Price $100 pair

STYLE# CCF12 15 SS
With Stainless Steel Weights
Price $140 pair

Shipping - Within the 48 Continental USA $26, Alaska/Hawaii is $50, Canada is $50-$75. All others please call.

Canyon Mud Flap Colorado 2015-Current Front 12″ Wide Drill-less – Style CCF12 15

This is approximately 12 inches wide by 3/8 inch thick, designed to hang approximately 7 inches below the fender well.

Application: FRONT of 2015 – current STOCK Colorado and Canyon.

Mounting: DuraFlap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck. Instructions included.

Serviceability: Mudflap is pre-drilled and requires no drilling of additional holes in your truck. Allows for easy & precise alignment, and drill-less installations.

 

Select options
Mud Flap for Colorado / Canyon

STYLE# CCF12L 15
NO Stainless Steel Weights
Price $105 pair

STYLE# CCF12L 15 SS
With Stainless Steel Weights
Price $145 pair

Shipping - Within the 48 Continental USA $26, Alaska/Hawaii is $50, Canada is $50-$75. All others please call.

Canyon Mud Flap Colorado 2015-Current Front 12″ Wide Drill-less – Style CCF12L 15

This is approximately 12 inches wide by 3/8 inch thick, designed to hang approximately 9 inches below the fender well.

Application: FRONT of 2015 – current Colorado and Canyon truck with stock wheels and tires; with a slight lift or level kit.

Mounting: DuraFlap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck. Instructions included.

Serviceability: Mudflap is pre-drilled and requires no drilling of additional holes in your truck. Allows for easy & precise alignment, and drill-less installations.

 

Select options
Colorado / Canyon Mud Flap

STYLE# CCR12L 15
NO Stainless Steel Weights
Price $110 pair

STYLE# CCR12L 15 SS
With Stainless Steel Weights
Price $150 pair

Shipping - Within the 48 Continental USA $26, Alaska/Hawaii is $50, Canada is $50-$75. All others please call.

Mud Flap for Canyon and Colorado 2015-Current Rear 12″ Wide Drill-less – Style CCR12L 15

This mud flap for Canyon and Colorado trucks is approximately 12 inches wide by 3/8 inch thick, designed to hang approximately 12 inches below the fender well.

Application: REAR of 2015 – current STOCK Colorado and Canyon with a slight lift; or those wanting protection of a boat or trailer.

Mounting: DuraFlap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck. Instructions included.

Serviceability: Mudflap is pre-drilled and requires no drilling of additional holes in your truck. Allows for easy & precise alignment, and drill-less installations.

 

Select options
Colorado / Canyon Mud Flap

STYLE# CCR12 15
NO Stainless Steel Weights
Price $105 pair

STYLE# CCR12 15 SS
With Stainless Steel Weights
Price $145 pair

Shipping - Within the 48 Continental USA $26, Alaska/Hawaii is $50, Canada is $50-$75. All others please call.

Mud Flap for Colorado and Canyon 2015-Current Rear 12″ Wide Drill-less – Style CCR12 15

This mud flap for colorado and canyon trucks is approximately 12 inches wide by 3/8 inch thick, designed to hang approximately 10 inches below the fender well.

Application: REAR of 2015 – current STOCK Colorado and Canyon.  Wider and longer mud flaps for modified trucks are available.  Just give us a call.

Mounting: DuraFlap mounting hardware is made of stainless steel where available. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck. Instructions included.

Serviceability: Mudflap is pre-drilled and requires no drilling of additional holes in your truck. Allows for easy & precise alignment, and drill-less installations.

 

Select options
Mudflap on 2020 Chevy Front

STYLE# CF14 20
NO Stainless Steel Weights
Price $110 pair

STYLE# CF14 20 SS
With Stainless Steel Weights
Price $155 pair

Shipping - Within the 48 Continental USA $26, Alaska/Hawaii is $50, Canada is $50-$75. All others please call.

Chevy 2020 Mud Flap 2020-Current Front 14″ Wide Long Drill-less – Style CF14 20

This mud flap for 2020 Chevy is approximately 14 inches wide by 3/8 inch thick, designed to hang approximately 10 inches below the fender well.

The application for this mud flap is the front of the 2020 – current Chevy 2500/3500 trucks with the factory trim guard in place.

This will work only with the wider splashguard.  If you have the narrow splashguard you will want to review our CF12 20 mud flap.

Stainless Steel is the main structure of the hardware used. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck. Instructions included.

There is no drilling required for the installation. This allows for easy & precise alignment, and drill-less installations.  These mud flaps will be installed in front of the factory trim guards.  The trim guards need to stay in place to avoid the gap in the lower panel behind the fender well.

 

Select options
Mudflap on 2020 Chevy Front

STYLE# CF12 20
NO Stainless Steel Weights
Price $110 pair

STYLE# CF12 20 SS
With Stainless Steel Weights
Price $150 pair

Shipping - Within the 48 Continental USA $26, Alaska/Hawaii is $50, Canada is $50-$75. All others please call.

MudFlap for 2020 Chevy 2020-Current Front 12″ Wide Drill-less – Style CF12 20

This mudflap for 2020 Chevy is approximately 14 inches wide by 3/8 inch thick, designed to hang approximately 10 inches below the fender well.

The application for this mud flap is the front of the 2020 – current Chevy 2500/3500 trucks with the factory trim guard in place.

Stainless Steel is the main structure of the hardware used. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck. Instructions included.

There is no drilling required for the installation. This allows for easy & precise alignment, and drill-less installations.  These mud flaps will be installed in front of the factory trim guards.  The trim guards need to stay in place to avoid the gap in the lower panel behind the fender well.

 

Select options
2020 Chevy Front Mud Flap

STYLE# CF14L 20
NO Stainless Steel Weights
Price $115 pair

STYLE# CF14L 20 SS
With Stainless Steel Weights
Price $160 pair

Shipping - Within the 48 Continental USA $26, Alaska/Hawaii is $50, Canada is $50-$75. All others please call.

Chevy Mud Flap 2020-Current Front 14″ Wide Extra Long Drill-less – Style CF14L 20

This Chevy Mud Flap 2020 is approximately 14 inches wide by 3/8 inch thick, designed to hang approximately 12 inches below the fender well.

The application for this mud flap is the front of the 2020 – current Chevy 2500/3500 trucks with the factory trim guard in place.  It is a great choice for trucks with slight lifts or level kits.  It is also a great selection for dually trucks needing maximum protection for the larger rear fenders.

This will work only with the wider splashguard.  If you have the narrow splashguard you will want to review our CF12 20 mud flap.

Stainless Steel is the main structure of the hardware used. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck. Instructions included.

There is no drilling required for the installation. This allows for easy & precise alignment, and drill-less installations.  These mud flaps will be installed in front of the factory trim guards.  The trim guards need to stay in place to avoid the gap in the lower panel behind the fender well.

 

Select options
2022 GMC Front Mud Flap

STYLE# CF12L 20
NO Stainless Steel Weights
Price $115 pair

STYLE# CF12L 20 SS
With Stainless Steel Weights
Price $155 pair

Shipping - Within the 48 Continental USA $26, Alaska/Hawaii is $50, Canada is $50-$75. All others please call.

Chevy MudFlap 2020-Current Front 12″ Wide Extra Long Drill-less – Style CF12L 20

This Chevy MudFlap 2020 is approximately 12 inches wide by 3/8 inch thick, designed to hang approximately 12 inches below the fender well.

The application for this mud flap is the front of the 2020 – current Chevy 2500/3500 trucks with the factory trim guard in place.  It is a great choice for trucks with slight lifts or level kits.  It is also a great selection for dually trucks needing maximum protection for the larger rear fenders.

Stainless Steel is the main structure of the hardware used. Other mounting products are made of anti-corrosive and rust resistant materials. Our drill-less Mudflaps are custom designed to utilize existing factory holes and other mounting points available on your truck. Instructions included.

There is no drilling required for the installation. This allows for easy & precise alignment, and drill-less installations.  These mud flaps will be installed in front of the factory trim guards.  The trim guards need to stay in place to avoid the gap in the lower panel behind the fender well.

 

Select options
2020 Chevy 2500 mud flap

STYLE# CR14 20
NO Stainless Steel Weights
Price $115 pair

STYLE# CR14 20 SS
With Stainless Steel Weights
Price $160 pair

Shipping - Within the 48 Continental USA $26, Alaska/Hawaii is $50, Canada is $50-$75. All others please call.

Mud Flap for Chevy 2020 – Current Rear 14″ Wide Drill-less – Style CR14 20

This Mud Flap for Chevy 2020 is approximately 14 inches wide by 3/8 inch thick, designed to hang approximately 13 inches below the fender well.

Fits the REAR of the 2020 – current Chevy  2500/3500 trucks with the factory trim guard in place.  This will work with either the wider splashguard or the narrow splashguard.  If you have the narrow splashguard you will also want to review our CR12 20 mud flap.

Made of stainless steel where available the mounting hardware will not rust. Other mounting products are made of anti-corrosive and rust resistant materials. Custom designed to utilize existing factory holes and other mounting points available on your truck. Instructions included.

No drilling of additional holes in your truck makes for a drill-less installation. Allows for easy & precise alignment, and drill-less installations.  These mud flaps will be installed in front of the factory trim guards.  The trim guards need to stay in place to avoid the gap in the lower panel behind the fender well.

 

Select options
WPChat